Omron HJ-112 instruction manual Battery Replacement

Page 11

Battery Replacement

When the battery is removed from the unit, the settings and all data stored in the memory will be erased.

Be sure to write important memory data in a notebook. Low Battery Indicator

NOTES:

•When the Low Battery Indicator starts to blink, the unit stops counting, the value of the latest number of steps is turned on, and the time is displayed as “_:_ _”.

•When the Low Battery Indicator is blinking, press the MODE Button to display the data for the current day. Press the . MEMO/▲ Button to view the data stored in the memory.

When the Low Battery Indicator appears on the display screen remove the old battery.

Take the battery out with a thin stick that is not easily breakable.

NOTES:

• DO NOT use a pair of metal tweezers or a screwdriver.

• Replace with a new CR2032 battery.

Caution

Dispose of the device, battery, and components according to applicable local regulations. Unlawful disposal may cause environmental pollution.

Caution

Do not throw the battery into fire. The battery may explode.

11

Image 11

Contents Pocket Pedometer Model HJ-112 Contents SAVE THESE Instructions IntroductionOperating the Device Important Safety InformationCare and Maintenance Know Your Unit System Reset Button Battery Cover Screw of Battery CoverComponents How to attach the strap to the main unit300 x 0.95 = 285 kcal Aerobic Step FunctionCalorie Display Stride Length Measurement How to measure your stride lengthReplace the Battery Cover Battery InstallationOpen the Battery Cover Insert the battery Battery Replacement Press the SET Button to set the hour Setting the TimeSetting range 1200 AM-1159 PM Install the battery Press the MEMO/ Button to advance by increments of one hourPress the SET button to set the minute Press the MEMO/ Button to advance by increments of 1 lb Setting the WeightSetting range 70 to 300 lb Press the SET Button to set the weightPress the SET Button to the stride length Setting the Stride LengthSetting range 100 to 400 feet Press the MEMO/ Button to advance by increments of 1 inchPlace the unit in your pocket Attaching the PedometerVibrations from a moving vehicle Unit moves irregularlyWalking at an inconsistent pace Up and down movementChanging the Display Press the Mode Button to change the displayPress the Memory Button. The previous day data is displayed Using the Memory FunctionPress the Mode Button to return to the current day’s data Set the time, weight, and stride length again Using the System Reset FunctionUse the system reset function in the following cases Care and Maintenance Problem Cause Solution Troubleshooting TipsHJ-112N HJ-113-ZS SpecificationsFCC Statement Limited Warranty Page Page Omron Healthcare, Inc