ProForm C800, 831.150330 user manual Assembly, Make Things Easier for Yourself

Page 5

ASSEMBLY

Make Things Easier for Yourself

This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.

Before beginning assembly, carefully read the following information and instructions:

Assembly requires two people.

For help identifying small parts, use the PART IDENTIFICATION CHART.

Tighten all parts as you assemble them, unless instructed to do otherwise.

As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

The following tools (not included) are required for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

Lubricant, such as grease or petroleum jelly, and soapy water.

Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1.

Before beginning, make sure you under- stand the information in the box above. Note: Some parts described in the assem- bly steps may be pre-assembled.

Press a Notched Square Inner Cap (18) into the end of the Bench Frame (1). Attach a Base Cap

(9)to the Stabilizer (2) with an M4 x 16mm Screw

(58)and an M10 x 25mm Button Screw (78).

Attach another Base Cap to the Stabilizer in the same manner.

Attach the Stabilizer (2) and the “L”-bracket (76) to the Bench Frame (1) with two M10 x 95mm Carriage Bolts (61) and two M10 Nylon Locknuts (69). Secure the Stabilizer to the Bench Frame with two M10 x 68mm Button Bolts (79), two M10 Washers (67), and two M10 Nylon Locknuts. Do not tighten the Locknuts yet.

2.Press a Thin Notched Square Inner Cap (86) into the bottom of the Bench Leg (3). Attach the Small Base Cap (80) to the Bench Leg with an M4 x 16mm Screw (58).

Attach the Bench Leg (3) to the Bench Frame (1) with two M10 x 68mm Button Bolts (79), two M10 Washers (67), and two M10 Nylon Locknuts (69).

1

 

 

76

 

 

 

 

69

 

 

 

 

 

 

 

 

 

1

 

 

 

 

18

79

67

 

 

 

 

69

 

 

 

 

 

 

 

9

 

 

 

 

 

2

 

67

9

 

 

61

58

 

 

 

 

78

 

 

 

 

 

 

 

2

 

79

 

 

 

 

 

 

 

 

 

 

67

1

 

 

 

 

69

 

 

 

 

 

69

 

 

 

 

 

3

 

 

 

 

 

80

 

 

 

 

 

86

 

 

 

 

 

58

 

 

 

5

Image 5
Contents Sears, Roebuck and Co., Hoffman Estates, IL Model No Serial NoR N I N G Table of ContentsImportant Precautions For your benefit, read this manual carefully before Before YOU BeginRight Side Left SideMake Things Easier for Yourself AssemblyPage Tighten the four M10 Nylon Locknuts 69 used in step Head Screw 77 is under the Backrest Bracket armNumbers Repeat this step with the other Base 28 and Rear Support Make sure the Barbell Gliders are oriented as shown Assemble the other Top Bracket 36 in the same manner Do not tighten the Locknuts yetAttaching the Curl Post AdjustmentsAdjusting the Backrest Attaching Weights to the LEG Lever Using the Bench for Press ExercisesUsing the Olympic Weight Adapter Using the Safety Spotters Attaching Weights to the Barbell or the Weight CarriageUsing the Locking BAR Exercise Guidelines Staying Motivated Muscle ChartCooling Down Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateMonday Monday Qty Description Part LIST-Model NoPart Identification Chart Exploded Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL Full 90-DAY Warranty