ProForm PFSY74490 user manual Do not overtighten the Nylon Locknuts

11.Press a 2” Square Inner Cap (28) into each end of the Press Top Frame (9).

Attach the Press Top Frame (9) to the bracket on the Press Upright (2) and the Weight Top Frame (66) with four 5/16” x 2 3/4” Bolts (89), two Support Plates (94), and four 5/16” Nylon Locknuts (64).

12.Attach the Weight Guides (15) to the Weight Top Frame (66) with four 3/8” x 3 3/4” Bolts (59), four 3/8” Flat Washers (48), and four 3/8” Nylon Locknuts (50).

Do not overtighten the Nylon Locknuts.

13.Attach the Butterfly Seat Frame (14) to the Butterfly Upright (1) with two 5/16” x 2 3/4” Bolts (89), two 5/16” Washers (36), and two 5/16” Nylon Locknuts (64). Do not tighten the Nylon Locknuts yet.

11	64
	89
	66	94	28
	2
	64		94
	9		89
	28
12	50
	48
	66	50
	48
	59
	1
	59
			2
	15

13	1
	89
	14
	36
	64

8