HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the elliptical exerciser or a VCR or DVD player to the audio/video input jack; or a personal audio/video player to the audio/video jack below the television on the console. See page 12 for instructions.
Follow the steps below to operate the television.
1.Begin pedaling or press any button on the con- sole to turn on the console.
When you turn on the console, the console mode will be automatically selected and the word CONSOLE will appear on the screen.
2.Press the TV button to turn on the television.
To turn on the television, press the TV button once. The word TUNER will appear on the screen.
3.Press the Channel buttons to select the desired cable channel.
Note: Complete this step only if you are using ana- log cable. Otherwise, change channels through an external source such as your cable box or your VCR.
When you turn on the television, the screen will show the last cable channel that was selected. To select a different channel, press the Channel but- tons. The selected cable channel number will appear on the screen for a few seconds. Note: The television is equipped with a channel memo- rizing function that allows you to go directly from the current channel to the next channel saved in memory. Before channels can be selected in this way, they must be saved in the television’s memo- ry. See HOW TO USE THE INFORMATION MODE on page 22.
4.Press the Volume buttons to adjust the vol- ume.
5.When you are finished using the television, press the TV button.
To turn off the television, press the TV button repeatedly until the word CONSOLE appears on the screen.
HOW TO OPERATE A DVD PLAYER OR VCR
IMPORTANT: Before operating a DVD player or VCR, you must connect a CATV cable or an RCA component video cable to the console. See page 12 for instructions.
1.Begin pedaling or press any button on the con- sole to turn on the console.
When you turn on the console, the console mode will be automatically selected and the word CONSOLE will appear on the screen.
2.Select the appropriate viewing mode.
To operate a DVD player or VCR connected with a CATV cable, press the TV button repeatedly until the word TUNER appears on the screen.
To operate a DVD player or VCR connected with a component video cable, press the TV button repeatedly until the word AV1 appears on the screen. Then, press the play button on your DVD player or VCR.
3.Press the Volume buttons to adjust the volume.
When you press either Volume button, the volume level indicator will appear on the screen for a few seconds.
To use earphones or headphones (not included), plug them into the headphone jack on the console.
4.When you are finished using the television, press the TV button.
When you press either Volume button, the volume level indicator will appear on the screen for a few seconds.
To use earphones or headphones (not included), plug them into the headphone jack on the console.
To turn off the television, press the TV button repeatedly until the word CONSOLE appears on the screen.
21