ProForm PFEL79907.1 user manual Locknuts are inside the hexagonal holes

Page 8

6.Orient the Left Roller Leg (12), which is marked with a “Left” sticker, near the left Crank Arm (36) as shown.

Apply a small amount of the included grease to both sides of a Wave Washer (98). Slide the Wave Washer onto the end of the left Crank Arm (36). Next, slide the Left Roller Leg (12) onto the Crank Arm and set the Roller (22) on the Base (1). Attach the Left Roller Leg with an M10 x 20mm Patch Screw (91), a Crank Axle Cap (30), and an M10 x 25mm Washer (94).

Repeat this step to attach the Right Roller Leg (21) to the right Crank Arm (not shown).

7.Identify the Left Handlebar (8), which is marked with a “Left” sticker. Insert the Left Handlebar into one of the Handlebar Legs (11) as shown.

Attach the Left Handlebar (8) with two

M8 x 42mm Bolts (71) and two M8 Nylon Locknuts (96). Make sure that the Nylon

Locknuts are inside the hexagonal holes.

Assemble the Right Handlebar and the other Handlebar Leg (not shown) in the same way.

6
	36
	98
30	94
30
91		21
91	12
	12
		1
		22
7
		8
	Hexagonal	96
	Holes
	11
		71

8

Image 8

Contents Call TOLL-FREE QUESTIONS?Model No. PFEL79907.1 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Page Avoid pinching Wires and cable during this step Locknuts are inside the hexagonal holes Repeat this step for the Right Handlebar not shown Repeat this step for the Right HandlebarDo not overtighten the Patch Screws. Repeat and this step for the Right Pedal Leg not shownThis step WiresAvoid pinching HOW to Connect a 75 OHM Catv Cable HOW to USE the Elliptical Exerciser HOW to Plug in the Power CordHOW to Move the Elliptical Exerciser HOW to Level the Elliptical ExerciserConsole Diagram Features of the ConsoleHOW to USE the Manual Mode Select the manual modeChange the resistance of the pedals as desired Follow your progress with the displayIf the pedals do not move for several seconds, a When you are finished exercising, the consoleWill turn off automatically HOW to USE a Preset Program Select a preset programHold the handgrip pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program HOW to Create a Custom Program Select a custom programHOW to USE a Custom Program Change the program if desiredHOW to Operate the Personal Television HOW to Operate a DVD Player or VCRSelect the appropriate viewing mode Press the Volume buttons to adjust the volumePress the TV button again and select a cable connection HOW to USE the Information ModePress the TV button again and add or delete cable channels HOW to Adjust the Drive Belt Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting Solution Television TroubleshootingProblem Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page Part LIST-Model No. PFEL79907.1 Key No. Qty DescriptionQty Description PFEL79907.1 Exploded Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty