5. Measure your heart rate if desired.
If there are sheets of clear plastic on the metal contacts on the handgrip pulse sensor, remove the plas-
If the screen does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts too tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.
6. When you are finished exercising, the console |
tic. To measure your heart rate, hold the handgrip
Contacts
will turn off automatically. |
If the pedals do not move for several seconds, a |
pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the contacts too tightly.
When your pulse is detected, your heart rate will appear on the screen. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. Note: If you continue to hold the hand- grip pulse sensor, the screen will show your heart rate for up to 30 seconds.
tone will sound and the console will pause. The |
time will also flash in the display. If the pedals do |
not move for several minutes and the buttons are |
not pressed, the console will turn off and the dis- |
play will be reset. Note: If the console does not |
turn off after several minutes, the console is in |
the “demo” mode. See HOW TO USE THE |
INFORMATION MODE on page 22 and turn off |
the demo mode. |
16