JVC UX-A52 English, Turning On the Power, Selecting the Sources and Starting Play, Standby/On

English

Turning On the Power

When you press the play buttons (CD 3 / 8, TAPE 2 3) for a particular source or FM/AM and AUX/MD, the unit automatically turns on (and starts playback if the source is ready.)

To turn on the unit without playing, press

STANDBY/ON.

The STANDBY/ON lamp on the electronic swing panel lights green.

To turn off the unit (on standby), press

STANDBY/ON again.

The STANDBY/ON lamp on the electronic swing panel lights red.

•“0:00” appears on the display until you set the built-in clock. After setting the clock, the clock time will appear on the display while the unit is turned off (on standby.)

•A little power is always consumed even while the unit is on standby.

To set the built-in clock, see page 31.

To switch off the power supply completely, unplug the

AC power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The clock setting, the tuner preset stations and other settings will be erased.

Selecting the Sources and Starting Play

To select the tuner, press FM/AM.

The unit automatically turns on (when the unit is on standby) and the last selected station is tuned in.

Each time you press FM/AM, the band alternates between FM and AM.

• For more detailed operations, see pages 14 to 16.

To select the CD player, press CD 3 / 8.

The unit automatically turns on (when the unit is on standby), and “CD” appears on the display. Play will start if a CD is on the disc tray. (“NO DISC” will appear on the display if a CD is not loaded.)

To stop playback, press 7.

• For more detailed operations, see pages 17 to 21.

To select the cassette deck, press TAPE 2 3.

The unit automatically turns on (when the unit is on standby), and “TAPE” appears on the display. Play will start if a cassette is in the cassette loading slot. (“NO TAPE” will appear on the display if a cassette is not in the cassette loading slot.)

To stop playback, press 7.

• For more detailed operations, see pages 22 and 23.

To select external equipment, press AUX/MD. The unit automatically turns on (when the unit is on standby), and “AUX” appears on the display.

•For more detailed operations, see pages 24 and 25.

•For operating the external equipment, see the manuals supplied with them.

– 11 –