JVC UX-A52 ProgramPlay, Programing the Playing Order of the Tracks, To check the program contents

Continued

English

Programing the Playing Order of the Tracks

—Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

On the remote control ONLY:

1 Load a CD.

2 Press CD 3/ 8, then 7.

The source is changed to “CD.”

3 Press PLAY MODE repeatedly until “PROGRAM” appears on the display.

•Each time you press the button, play mode changes as follows:

PROGRAM	RANDOM
(Program Play)	(Random Play)

(Normal Play)

4 Press the number buttons to select the tracks.

•For how to use the number buttons, see “To go to another track directly using the number buttons” on page 19.

CD indicator Current track number

Program

number

Total playing time

To check the program contents

Before playing, you can check the program contents by pressing 4or ¢.

•4 : Shows the programed tracks in the reverse order.

•¢ : Shows tracks in the programed order.

To modify the program

Before or after playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before you start play,

press the number buttons to select track numbers you want to add.

To erase the entire program, press CD open/close 0 to eject the CD.

• Turning off the unit will also erase the program.

If you try to program a 33rd step

“MEMORY FULL” will appear on the display.

If your entry is ignored

You have tried to program a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks.) Such entries are ignored.

If the total playing time is 100 minutes (one hour and 40 minutes) or more

The total playing time will not be shown. (“– – : – –” will appear.)

Play mode

5 Press CD 3/ 8.

The tracks are played in the order you have programed. Program Play ends when all the tracks are played once.

To stop during play, press 7.

To exit from Program Play, press PLAY MODE repeatedly so that the unit enters the other play modes (Random Play or Normal Play) before or after play.

– 20 –