Seiko 7K32 manual HOW to SET the Date, Time Difference Adjustment

[Adjustment of barometer hand “1” position]	1000hPa position
Press button B to reset barometer hand
“1” to “1000hPa”.										ALTI
Notes:	Button B					0m		0
・With each press of the button, the			50					1000		1		.5
											Pa		0
						950					050	5
barometer hand “1” moves 2hPa.	10	0									h		0			0
	0		9	0	0							0			0
															5
												5
・The hand moves quickly if the button is												0
	0															5
			0										5			0
	0		5										5			4
			8										0
kept pressed.	5											6 0 0				0
	1		0													4
			8												0	0
		0
			0
			0			750		70				5	0	0			Pull out crown “1”
			0							650		3
※Then, go back to step (3) in “■TIME SETTING” to			2			0	052		0
								0003			0						to the second click.
											0
complete the time setting procedure.

■HOW TO SET THE DATE

・After setting the time, set the date and moon phase following the procedure below.
・Also follow the procedure below to adjust the date in 30-day month or February.
(1) Pull out crown “1” to the first click.
(2) Turn crown “1” counterclockwise to set the date.							0		A
Notes:						0m					LT
					0		1000				I.
			5									5
・Do not set the date and moon phase between						50			105
						9					0h		5
		0									Pa			0
	0											5		0
9:00 PM and 1:00 AM. Otherwise, they may not			9	0	0							0				5
												0					0
	0
	1																0
change properly. If it is necessary to set them			0											5			0
																	4
	0		5											5
			8											0
	0																5
during that time period, first move the hour hand	5																0
	1		8										0				0
			0														4
to any time outside it, set the date and moon			0									6	0		0	0		Pull out crown
		0												0
			0			750				650
			0
phase, and then reset the time. To move the			2				70	0				3						“1” to the first
												5
						0052	0003				0
											0
hour hand, refer to “Time difference adjustment																		Date click.

function”.

(2) After all the adjustments are completed, push crown "1" back in to the normal position.

■TIME DIFFERENCE ADJUSTMENT

・The hour hand can be adjusted independently of other hands. When you travel abroad and move between different time zones, the time of the place you visit can be shown easily on the watch by turning the hour hand only.

・The alarm hour hand can also be adjusted independently of the other hands to show the time of the place you visit.(Refer to〈“Time difference adjustment of the alarm hour hand〉”.)

[How to determine the time difference between two cities]

・Before making the time difference adjustment, it is necessary to obtain the time difference between the two cities.

・As the hour hand indicates the time on a 12 hour basis, AM/PM, the date and moon phase of the place may not be adjusted properly even if the hour hand is turned to show the time of the place you visit. Before setting the hand, therefore, be sure to find the time difference between the cities following the procedure below.

〈How to calculate the time differences〉

Assuming that you move from time zone “A” to time zone “B” and that the time difference from GMT for the two zones are “a” and “b”, respectively, time difference between them can be obtained from the following formula:

[b] － [a].

Ex.) If you move from Japan to New York:

Time difference from GMT for Japan, time zone A : ＋9 (a)

Time difference from GMT for New York, time zone B : －5 (b) Time difference between the two cities is:

[b] － [a] ＝ (－5) － (＋9) ＝ (－14) hours

Note: If the daylight saving time is in effect in an area, add one hour to the time difference from GMT before calculation

61 62