JVC RX-5022VSL, RX-5020VBK manual Press Test to check if you can hear, Press Control UP, Tone

Page 24
SURROUND MODE

Creating Realistic Sound Fields

3 Press SOUND.

SOUND

The 10 keys are activated for sound adjustments.

4 Press TEST to check if you can hear the

TEST

 

sounds through all the speakers at the

1

 

equal level.

 

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

 

TEST TONE L

 

TEST TONE C

 

 

TEST TONE R

 

 

(Left front speaker)

 

(Center speaker)

 

 

(Right front speaker)

 

 

TEST TONE LS

 

TEST TONE RS

 

 

(Left rear speaker)

 

 

(Right rear speaker)

 

 

Notes:

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CNTR SP” is set to “NONE.”

•No test tone comes out of the rear speakers when “REAR SP” is set to “NONE.”

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one

 

 

 

ADJUST

SETTING

 

 

of the following indications (with the

 

 

 

 

 

 

 

 

 

 

 

 

current setting)* appears on the

 

 

 

display.

 

 

 

 

 

 

 

 

CENTER :To adjust the center speaker output level

 

(–10 to +10).

 

 

 

 

 

 

 

 

REAR L : To adjust the left rear speaker output level (–10 to +10).

REAR R : To adjust the right rear speaker output level (–10 to +10).

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

2) Press CONTROL UP 5/

DOWN UP

 

CONTROL

DOWN ∞ to adjust the selected

 

speaker output level.

 

5Adjust the speaker output levels

(–10 to +10).

Adjust the center speaker and rear speakers levels comparing to the sound from the front speakers.

• To adjust the center speaker level, press

CENTER +/–.

• To adjust the left rear speaker level, press

REAR•L +/–.

CENTER

2 3

REAR L

5 6

REARR

3)Repeat steps 1) and 2) to adjust the other speaker levels.

When you select “PL II MUSIC,” you can go to the following adjustment.

• To adjust the right rear speaker level, press

REAR•R +/–.

8 9

4 Turn on Panorama control or off.

1) Press ADJUST repeatedly until

Remote

NOT

6 Press TEST again to stop the test

TEST

tone.

1

 

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So make adjustments while listening to the sound of the source played back.

1Setting the analog or digital input mode for the

“PANORAMA” (with the current

setting)* appears on the display.

*“OFF” is the initial setting. If you have already changed the setting, “ON” will be shown.

2)Press CONTROL UP 5/ DOWN ∞ to select if you turn on or off Panorama control.

•Each time you press the button, “ON” and “OFF” change alternately.

ADJUST SETTING

CONTROL

DOWN UP

source you like to listen and start playing.

When playing back software encoded with Dolby Digital and DTS Digital Surround, select the digital input mode (see page 11).

2 Press SURROUND ON/OFF to

SURROUND ON/OFF

 

activate Surround mode.

 

Each time you press the button, Surround mode turns on and off alternately.

•If you are playing back software encoded with Dolby Digital multichannel, “DOLBY DIGITAL” is selected.

•If you are playing back software encoded with DTS Digital Surround, “DTS SURROUND” is selected.

• If you are playing back any software other than above, you can select “PL II MUSIC” or “PL II MOVIE” according to the source by pressing SURROUND MODE. ( PRO LOGIC II indicator lights up on the display.)

If you like to adjust sound, go to step 3.

ON

: Select this when you like to enjoy

 

“wraparound” sound effect with side-wall

 

image.

 

 

OFF

: Select this when you like to enjoy

 

originally recorded sounds.

 

 

To cancel Surround mode

Press SURROUND ON/OFF again so that “SURROUND OFF” appears on the display.

•If Surround mode is canceled while playing back multichannel digital software, all channel signals are mixed and output through the front speakers (and subwoofer, if you have connected a subwoofer and set the subwoofer setting correctly—“YES”).

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Connecting the Speakers Speaker layout diagramConnecting the front, center and rear speakers Connecting the subwoofer speakerConnecting Audio/Video Components Analog connections Audio component connectionsVideo component connections Connecting the Power Cord Plug the power cord into an AC outletDigital connections DVD playerTurning On the Power Basic OperationsSelecting the Source to Play Changing the source nameListening Only with Headphones Adjusting the VolumeFrom the remote control Selecting different sources for picture and soundBasic adjustment auto memory Signal and speaker indicators on the displayTurning Off the Sounds Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeSetting the Speaker Information Remote Register whether you have connected a subwoofer or notSubwoofer information Unit with the current setting Appears on the display Select the unitPress Control UP /DOWN Select the appropriate speaker DistanceSetting* appears on the display Press Setting repeatedly until LFESelect the low frequency effect attenuator level Select the appropriate compression levelSound Adjustments Adjusting the Front SpeakersAdjusting the Subwoofer Output Level Output BalanceTuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes All Channel StereoAll Channel Stereo reproduction Creating sound fieldAbout Relations between Speaker Layout and Surround Modes Turning on or off the Surround modesSelecting the Surround modes Speaker Layout Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Setting the analog or digital input mode for Press Test to check if you can hearSounds through all the speakers at Equal level Press Control UPUsing DAP Modes and All Channel Stereo Compu Link Remote Control System Press the play 3 button on the CD playerSynchronized Recording Automatic Source SelectionSound Adjustment Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD changer Cassette deckCD recorder Operating Video Components DVD playerBefore operating, set TV/CATV selector to TV To change the transmittable signals for operating a TV Operating Other Manufacturers’ Video EquipmentTry to operate your TV by pressing Try to operate your Catv converter by pressingIf there are more than one code listed for your brand Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for VCRTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents