JVC RX-5020VBK, RX-5022VSL manual Using DAP Modes and All Channel Stereo

Page 25
ADJUST SETTI
ADJUST SETTIN
SURROUND MODE

Using DAP Modes and All Channel Stereo

Once you have adjusted the DAP modes and All Channel Stereo, the adjustment is memorized for each source.

•You cannot use the DAP modes and All Channel Stereo if the rear speakers are not connected or deactivated.

•You cannot adjust the effect level for “ALL CH STEREO.”

From the remote control:

It will be convenient for you to use the remote control for adjustments, since you can make adjustments from your listening point.

1Start playing 2 channel software—either analog or Linear PCM—and select the source.

2 Press SURROUND ON/OFF to

ON/OFF

activate Surround mode.

SURROUND

 

When Surround mode turns on, the last selected

Surround mode will be activated.

•Each time you press the button, Surround mode turns on and off alternately.

3Press SURROUND MODE repeatedly SURROUND

until one of the DAP modes—“LIVE

MODE

 

CLUB,” “DANCE CLUB,” “HALL,”

 

“PAVILION”—or “ALL CH

 

STEREO” appears on the display.

 

2 Press SURROUND ON/OFF to

SURROUND ON/OFF

 

activate Surround mode.

 

When the Surround mode turns on, the last selected Surround mode will be activated.

•Each time you press the button, Surround mode turns on and off alternately.

3 Press SURROUND MODE

repeatedly until one of the DAP modes—“LIVE CLUB,” “DANCE

CLUB,” “HALL,” “PAVILION”—

or “ALL CH STEREO” appears on the display.

The DSP indicator also lights up on the display.

If you like to adjust sound, go to step 4.

4Adjust the speaker output levels.

1) Press ADJUST repeatedly until one of the following indications (with the current setting)* appears on the display.

REAR L : To adjust the left rear speaker output level (–10 to +10).

REAR R : To adjust the right rear speaker output level (–10 to +10).

CENTER : For “ALL CH STEREO” only—to adjust the

Creating Realistic Sound Fields

The DSP indicator also lights up on the display.

If you like to adjust sound, go to step 4.

4Press SOUND.

The 10 keys are activated for sound adjustments.

5Adjust the speakers output levels (–10 to +10).

•To adjust the left rear speaker level, press REAR•L +/–.

•To adjust the right rear speaker level, press REAR•R +/–.

For “ALL CH STEREO” only:

•To adjust the center speaker level, press CENTER +/–.

SOUND

REAR L

5 6

REARR

8 9

CENTER

2 3

center speaker output level (–10 to +10).

*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.

2) Press CONTROL UP 5/DOWN ∞ CONTROL

DOWN UP

to adjust the selected speaker output level.

3)Repeat steps 1) and 2) to adjust the other speaker level.

5For DAP modes only: Adjust the effect level.

1) Press ADJUST repeatedly until “EFFECT” (with the current setting)* appears on the display.

* “EFFECT 3” is the initial setting. If you have already

6 For DAP modes only:

 

Press EFFECT to select the effect

EFFECT

level (1 to 5) you want.

4

 

•Each time you press the button, the effect level changes as follows:

changed the setting, another setting will be shown.

2) Press CONTROL UP 5

DOWN UP

 

CONTROL

/DOWN ∞ to select the effect level

 

(1 to 5) you want.

 

•Each time you press the button, the effect level changes as follows:

EFFECT 1

EFFECT 2

EFFECT 3

EFFECT 1

EFFECT 2

EFFECT 3

EFFECT 5

EFFECT 4

 

EFFECT 5

 

 

EFFECT 4

 

 

As the number increases, selected mode becomes stronger

As the number increases, selected mode becomes stronger

(normally set it to “EFFECT 3”).

 

(normally set it to “EFFECT 3”).

 

 

 

Note:

 

 

 

 

 

 

 

You cannot select any DAP mode and All Channel Stereo when software

On the front panel:

 

encoded with Dolby Digital or DTS Digital Surround is played back.

 

 

 

 

 

 

1 Start playing 2 channel software—either analog

To cancel DAP modes and All Channel Stereo

or Linear PCM—and select the source.

Press SURROUND ON/OFF so that “SURROUND OFF” appears

 

 

on the display. The DSP indicator goes off.

 

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverAM antenna connection Connecting the FM and AM AntennasFM antenna connection Speaker layout diagram Connecting the SpeakersConnecting the front, center and rear speakers Connecting the subwoofer speakerAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections Plug the power cord into an AC outlet Connecting the Power CordDigital connections DVD playerBasic Operations Turning On the PowerSelecting the Source to Play Changing the source nameAdjusting the Volume Listening Only with HeadphonesFrom the remote control Selecting different sources for picture and soundSignal and speaker indicators on the display Basic adjustment auto memoryTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsRegister whether you have connected a subwoofer or not Setting the Speaker Information RemoteSubwoofer information Select the unit Unit with the current setting Appears on the displayPress Control UP /DOWN Select the appropriate speaker DistancePress Setting repeatedly until LFE Setting* appears on the displaySelect the low frequency effect attenuator level Select the appropriate compression levelAdjusting the Front Speakers Sound AdjustmentsAdjusting the Subwoofer Output Level Output BalanceUsing Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode Dolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionAll Channel Stereo DAP Digital Acoustic Processor modesAll Channel Stereo reproduction Creating sound fieldTurning on or off the Surround modes About Relations between Speaker Layout and Surround ModesSelecting the Surround modes Speaker Layout Available Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Press Test to check if you can hear Setting the analog or digital input mode forSounds through all the speakers at Equal level Press Control UPUsing DAP Modes and All Channel Stereo Press the play 3 button on the CD player Compu Link Remote Control SystemSynchronized Recording Automatic Source SelectionOperating JVC’s Audio/Video Components Sound AdjustmentOperating Audio Components TunerCassette deck CD changerCD recorder DVD player Operating Video ComponentsBefore operating, set TV/CATV selector to TV Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVTry to operate your TV by pressing Try to operate your Catv converter by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandTry to operate your DVD player by pressing Manufacturers’ codes for VCRProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionAM tuner FM tuner IHFGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents