JVC RX-5020VBK manual Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner

Page 27

Operating JVC’s Audio/Video Components

You can use the remote control to operate other JVC’s

Sound Adjustment

components.

You can always perform the following operations:

 

 

 

 

Operating Audio Components

 

SURROUND ON/OFF : Turn on or off the Surround modes.

 

 

SURROUND MODE : Select the Surround modes.

COMPU LINK

IMPORTANT:

To operate JVC’s audio components using this remote control:

You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 24) in addition to the connections using cables with RCA pin plugs (see page 6).

Aim the remote control directly at the remote sensor on the receiver.

If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 8.)

Refer also to the manuals supplied with your audio components.

TV CATV

A/V CONTROL

STANDBY/ON

 

 

RECEIVER

 

TEST

 

CENTER

AUDIO

1

 

2

3

 

EFFECT

 

REAR L

TV/CATV

 

 

 

 

4

 

5

6

 

MENU

 

REAR R

VCR

 

 

 

 

7/P

 

8

9

 

ENTER

 

SUBWOOFER

DVD

10

 

0

10

 

RETURN

 

 

100

SLEEP

SOUND

 

 

REW

 

 

FF

REC PAUSE

 

 

CD–DISC

TAPE/CDR

 

CD

DVD

 

 

 

 

 

ANALOG

FM/AM

TV SOUND

VCR

/DIGITAL

FM MODE

 

 

 

 

 

 

 

ON/OFF

 

 

TV/VIDEO SURROUND

MUTING

 

 

 

MODE

 

VCR CH

TV/CATV CH TV VOLUME

VOLUME

REMOTE CONTROL RM - SRX5020J

After pressing SOUND, you can use the following buttons for sound adjustment:

SUBWOOFER +/–

: Adjust the subwoofer output level.

CENTER +/–

: Adjust the center speaker output level.

 

 

REAR•L +/–

: Adjust the left rear speaker output level.

REAR•R +/–

: Adjust the right rear speaker output level.

 

 

EFFECT

: Select the DAP effect level.

TEST

: Turn on or off the test tone output.

 

 

Note:

After adjusting sounds, press the corresponding source selecting button or CD-DISC to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

Tuner

You can always perform the following operations:

FM/AM

: Alternate between FM and AM.

FM MODE

: Change the FM reception mode.

 

 

After pressing FM/AM, you can use the following buttons for tuner operations:

1 – 10, +10: Select a preset channel number directly.

• For channel number 5, press 5.

• For channel number 15, press +10, then 5.

• For channel number 20, press +10, then 10.

CD player

After pressing CD, you can use the following buttons for CD operations:

3

: Start playback.

4

: Return to the beginning of the current

 

(or previous) track.

 

 

¢

: Skip to the beginning of the next track.

7

: Stop playback.

 

 

8

: Pause playback. To release it, press 3.

1 – 10, +10

: Select a track number directly.

 

• For track number 5, press 5.

 

• For track number 15, press +10, then 5.

 

• For track number 20, press +10, then 10.

 

 

Remote Control

System /

Operating JVC's

Audio/Video Components

25

Image 27
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Connecting the subwoofer speaker Connecting the SpeakersSpeaker layout diagram Connecting the front, center and rear speakersConnecting Audio/Video Components Analog connections Audio component connectionsVideo component connections DVD player Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsChanging the source name Turning On the PowerBasic Operations Selecting the Source to PlaySelecting different sources for picture and sound Listening Only with HeadphonesAdjusting the Volume From the remote controlTemporarily-Muting Basic adjustment auto memorySignal and speaker indicators on the display Turning Off the SoundsSelecting the Analog or Digital Input Mode Basic SettingsSetting the Speaker Information Remote Register whether you have connected a subwoofer or notSubwoofer information Select the appropriate speaker Distance Unit with the current setting Appears on the displaySelect the unit Press Control UP /DOWNSelect the appropriate compression level Setting* appears on the displayPress Setting repeatedly until LFE Select the low frequency effect attenuator levelOutput Balance Sound AdjustmentsAdjusting the Front Speakers Adjusting the Subwoofer Output LevelTuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Typical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundCreating sound field DAP Digital Acoustic Processor modesAll Channel Stereo All Channel Stereo reproductionSpeaker Layout Available Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off the Surround modes Selecting the Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Press Control UP Setting the analog or digital input mode forPress Test to check if you can hear Sounds through all the speakers at Equal levelUsing DAP Modes and All Channel Stereo Automatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingTuner Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCD changer Cassette deckCD recorder Operating Video Components DVD playerBefore operating, set TV/CATV selector to TV Try to operate your Catv converter by pressing To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingManufacturers’ codes for VCR If there are more than one code listed for your brandTry to operate your VCR by pressing Try to operate your DVD player by pressingProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalFM tuner IHF AM tunerGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.