JVC RX-5022VSL, RX-5020VBK manual FM tuner IHF, AM tuner, General

Page 34

Specifications

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

Usable Sensitivity:

Monaural:

12.8 dBf (1.2 µV/75 Ω)

50 dB Quieting Sensitivity:

Monaural:

21.3 dBf (3.2 µV/75 Ω)

 

Stereo:

41.3 dBf (31.5 µV/75 Ω)

Signal-to-Noise Ratio (IHF-A weighted):

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

Total Harmonic Distortion:

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

Stereo Separation at REC OUT:

35 dB at 1 kHz

 

Alternate Channel Selectivity:

45 dB: (±400 kHz)

 

Frequency Response:

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

AM tuner

Tuning Range:

530 kHz to 1 710 kHz

 

Usable Sensitivity:

Loop antenna:

400 µV/m

Signal-to-Noise Ratio:

50 dB (100 mV/m)

 

General

Power Requirements:

AC 120V , 60 Hz

Power Consumption:

180 W/230 VA (at operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 146.5 mm x 416 mm

 

(17 3/16 in. x 5 13/16 in. x 16 7/16 in.)

Mass:

8.8 kg (19.5 lbs)

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverAM antenna connection Connecting the FM and AM AntennasFM antenna connection Connecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections Digital connections Connecting the Power CordPlug the power cord into an AC outlet DVD playerSelecting the Source to Play Turning On the PowerBasic Operations Changing the source nameFrom the remote control Listening Only with HeadphonesAdjusting the Volume Selecting different sources for picture and soundTurning Off the Sounds Basic adjustment auto memorySignal and speaker indicators on the display Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeRegister whether you have connected a subwoofer or not Setting the Speaker Information RemoteSubwoofer information Press Control UP /DOWN Unit with the current setting Appears on the displaySelect the unit Select the appropriate speaker DistanceSelect the low frequency effect attenuator level Setting* appears on the displayPress Setting repeatedly until LFE Select the appropriate compression levelAdjusting the Subwoofer Output Level Sound AdjustmentsAdjusting the Front Speakers Output BalanceUsing Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode DTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modesAll Channel Stereo Creating sound fieldSelecting the Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off the Surround modes Speaker Layout Available Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Sounds through all the speakers at Equal level Setting the analog or digital input mode forPress Test to check if you can hear Press Control UPUsing DAP Modes and All Channel Stereo Synchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCassette deck CD changerCD recorder DVD player Operating Video ComponentsBefore operating, set TV/CATV selector to TV Try to operate your TV by pressing To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your Catv converter by pressingTry to operate your DVD player by pressing If there are more than one code listed for your brandTry to operate your VCR by pressing Manufacturers’ codes for VCRTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionAM tuner FM tuner IHFGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents