JVC RX-5020VBK, RX-5022VSL manual Echostar General Instrument 02, 03, 04

Page 67

Operating Other Manufacturers’ Video Equipment

English

By changing the transmittable signals, you can use the remote control supplied for this unit to operate other manufacturers’ equipment.

•Refer also to the manuals supplied with the other products.

•To operate these components with the remote control, first you need to set the manufacturers’ codes each for TV, CATV converter, VCR and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

To change the transmittable signals for operating a TV

1Set TV/CATV selector to TV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s code using buttons 1–9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the TV.

STANDBY/ON

TV/CATV

 

: Turn on or off the TV.

TV/VIDEO

: Set the input mode (either TV or VIDEO).

 

 

TV VOLUME +/–

: Adjust the volume.

TV/CATV CH +/–

: Change the channels.

 

 

After pressing TV SOUND (source selecting button), you can use the following buttons on the TV:

1 – 10, 0, +10 (100+) :Select the channels.

+10 (100+) button will be function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your TV.

6Try to operate your TV by pressing

STANDBY/ON TV/CATV.

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer

Codes

 

 

JVC

01*

Hitachi

10

Magnavox

02

Mitsubishi

03

Panasonic

04, 11

RCA

05

Samsung

12

Sanyo

13

Sharp

06

Sony

07

Toshiba

08

Zenith

09

*Initial setting

To change the transmittable signals for operating a CATV converter

1Set TV/CATV selector to CATV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s code using buttons 1–9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the CATV converter.

STANDBY/ON TV/CATV

: Turn on or off the CATV converter.

TV/CATV CH +/– : Change the channels.

After pressing TV SOUND (source selecting button), you can use the following buttons on the CATV converter:

1 – 10, 0, +10 (100+) :Select the channels.

+10 (100+) button will be function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your CATV converter.

6Try to operate your CATV converter by pressing

STANDBY/ON TV/CATV.

When your CATV converter turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.

Manufacturers’ codes for CATV converter

Manufacturer

Codes

 

 

Echostar

01*

General Instrument

02, 03, 04, 05,

 

06, 07, 08, 09

Hamlin

16, 17, 18, 19

Pioneer

14, 15

RCA

20

Scient

10, 11

Sony

21

Zenith

12, 13

 

 

*Initial setting

28

Page 66 Page 68
Image 67
Page 66 Page 68
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Replace the cover Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedAM antenna connection Connecting the FM and AM AntennasFM antenna connection Connecting the subwoofer speaker Connecting the SpeakersSpeaker layout diagram Connecting the front, center and rear speakersAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections DVD player Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsChanging the source name Turning On the PowerBasic Operations Selecting the Source to PlaySelecting different sources for picture and sound Listening Only with HeadphonesAdjusting the Volume From the remote controlTemporarily-Muting Basic adjustment auto memorySignal and speaker indicators on the display Turning Off the SoundsSelecting the Analog or Digital Input Mode Basic SettingsRegister whether you have connected a subwoofer or not Setting the Speaker Information RemoteSubwoofer information Select the appropriate speaker Distance Unit with the current setting Appears on the displaySelect the unit Press Control UP /DOWNSelect the appropriate compression level Setting* appears on the displayPress Setting repeatedly until LFE Select the low frequency effect attenuator levelOutput Balance Sound AdjustmentsAdjusting the Front Speakers Adjusting the Subwoofer Output LevelUsing Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode Typical Multichannel 5.1 ch reproduction Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundCreating sound field DAP Digital Acoustic Processor modesAll Channel Stereo All Channel Stereo reproductionSpeaker Layout Available Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off the Surround modes Selecting the Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Press Control UP Setting the analog or digital input mode forPress Test to check if you can hear Sounds through all the speakers at Equal levelUsing DAP Modes and All Channel Stereo Automatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingTuner Sound AdjustmentOperating JVC’s Audio/Video Components Operating Audio ComponentsCassette deck CD changerCD recorder DVD player Operating Video ComponentsBefore operating, set TV/CATV selector to TV Try to operate your Catv converter by pressing To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressingManufacturers’ codes for VCR If there are more than one code listed for your brandTry to operate your VCR by pressing Try to operate your DVD player by pressingProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalAM tuner FM tuner IHFGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents