JVC RX-5022VSL manual Compu Link Remote Control System, Press the play 3 button on the CD player

Page 26

COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC’s audio components through the remote sensor on the receiver. To use this remote control system, you need to connect JVC’s audio components through the COMPU LINK-4 (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see page 6).

Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are completed.

Automatic Power On/Off (Standby): only possible with the COMPU LINK-3 and COMPU LINK-4

Both the CD player and cassette deck (or CD recorder) turn on and off (standby) along with the receiver.

When you turn on the receiver, the CD player or cassette deck (or CD recorder) will turn on automatically, depending on which component has been previously selected.

When you turn off the receiver, both the CD player and cassette deck (or CD recorder) will turn off (standby).

COMPU LINK-4

(SYNCHRO)

Cassette deck

or

CD recorder

CD player

Synchronized Recording

Synchronized recording means the cassette deck starts recording as soon as a CD begins playing.

To use synchronized recording, follow these steps:

1Put a tape in the cassette deck and a disc in the CD player.

2Press the record () button and the pause (8)

button on the cassette deck at the same time.

This puts the cassette deck into recording pause.

Notes:

There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth version—COMPU LINK-4. This version is added systematic operations with the CD recorder to the previous version—COMPU LINK-3.

If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components.

To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 8.)

Refer also to the manuals supplied with your audio components.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 25 to 27.

Automatic Source Selection

When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately.

In both cases, the previously selected source continues playing without sound for a few seconds.

If you do not press the record () button and pause (8) button at the same time, the synchronized recording feature will not operate.

3Press the play (3) button on the CD player.

The source changes on the receiver, and as soon as play starts, the cassette deck starts recording. When the play ends, the cassette deck enters recording pause, and stops about 4 seconds later.

Notes:

During synchronized recording, the selected source cannot be changed.

If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.

24

Image 26
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Front Panel Remote ControlParts Identification Getting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Replace the coverFM antenna connection Connecting the FM and AM AntennasAM antenna connection Connecting the front, center and rear speakers Connecting the SpeakersSpeaker layout diagram Connecting the subwoofer speakerVideo component connections Connecting Audio/Video ComponentsAnalog connections Audio component connections Digital connections Connecting the Power CordPlug the power cord into an AC outlet DVD playerSelecting the Source to Play Turning On the PowerBasic Operations Changing the source nameFrom the remote control Listening Only with HeadphonesAdjusting the Volume Selecting different sources for picture and soundTurning Off the Sounds Basic adjustment auto memorySignal and speaker indicators on the display Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeSubwoofer information Setting the Speaker Information RemoteRegister whether you have connected a subwoofer or not Press Control UP /DOWN Unit with the current setting Appears on the displaySelect the unit Select the appropriate speaker DistanceSelect the low frequency effect attenuator level Setting* appears on the displayPress Setting repeatedly until LFE Select the appropriate compression levelAdjusting the Subwoofer Output Level Sound AdjustmentsAdjusting the Front Speakers Output BalanceTuner Operations Tuning in Stations ManuallyUsing Preset Tuning Selecting the FM Reception Mode DTS Digital Surround Creating Realistic Sound FieldsDolby Surround Typical Multichannel 5.1 ch reproductionAll Channel Stereo reproduction DAP Digital Acoustic Processor modesAll Channel Stereo Creating sound fieldSelecting the Surround modes About Relations between Speaker Layout and Surround ModesTurning on or off the Surround modes Speaker Layout Available Surround modesPress Surround ON/OFF to Activate Surround modeIf you like to adjust sound, go to step Sounds through all the speakers at Equal level Setting the analog or digital input mode forPress Test to check if you can hear Press Control UPUsing DAP Modes and All Channel Stereo Synchronized Recording Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCD recorder CD changerCassette deck Before operating, set TV/CATV selector to TV Operating Video ComponentsDVD player Try to operate your TV by pressing To change the transmittable signals for operating a TVOperating Other Manufacturers’ Video Equipment Try to operate your Catv converter by pressingTry to operate your DVD player by pressing If there are more than one code listed for your brandTry to operate your VCR by pressing Manufacturers’ codes for VCRTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionGeneral FM tuner IHFAM tuner Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.