JVC RX-5020VBK, RX-5022VSL manual Connecting Audio/Video Components

Page 45

Getting Started

English

Connecting Audio/Video Components

Turn off all components before connections.

You can connect the following audio/video components to this receiver. Refer also to the manuals supplied with your components.

Audio Components

Video Components

 

 

• CD player*

• TV*

 

 

• Cassette deck

• VCR

or CD recorder*

• DVD player*

 

 

*You can connect these components using the methods described in “Analog connections” (below) or in “Digital connections” (see page 7).

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

Cassette deck or CD recorder

 

 

Cassette deck

 

To audio input

PHONO

To audio output

 

CD

 

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

IN

(PLAY)

TV SOUND

RIGHT LEFT

AUDIO

To audio input To audio output CD recorder

Note:

CD player

CD player

To audio output

CD

OUT

(REC)

TAPE

CDR

IN

(PLAY)

OUT

(REC)

VCR

IN

(PLAY)

TV SOUND

RIGHT LEFT

AUDIO

You can connect either a cassette deck or a CD recorder to the TAPE/ CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks, change the source name to “CDR,” which will be shown on the display when selected as the source. See page 8 for details.

If your audio components have a COMPU LINK jack

See also page 24 for detailed information about the connection and the COMPU LINK remote control system.

Video component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.

TV

TVCD

 

OUT

MONITOR

 

(REC)

OUT

 

TAPE

 

 

CDR

 

 

IN

DVD

 

(PLAY)

 

 

To audio

OUT

OUT

output

(REC)

(REC)

 

VCR

VCR

 

IN

IN

 

(PLAY)

 

(PLAY)

 

 

 

TV SOUND

VIDEO

 

 

 

RIGHT

LEFT

 

AUDIO

To video input

Connect the TV to the MONITOR OUT jack to view the playback picture from the other connected video components.

6

Page 44 Page 46
Image 45
Page 44 Page 46
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Remote Control Parts IdentificationFront Panel Checking the Supplied Accessories Before Installation Putting Batteries in the Remote ControlGetting Started Replace the coverConnecting the FM and AM Antennas AM antenna connectionFM antenna connection Speaker layout diagram Connecting the SpeakersConnecting the front, center and rear speakers Connecting the subwoofer speakerConnecting Audio/Video Components Analog connections Audio component connectionsVideo component connections Plug the power cord into an AC outlet Connecting the Power CordDigital connections DVD playerBasic Operations Turning On the PowerSelecting the Source to Play Changing the source nameAdjusting the Volume Listening Only with HeadphonesFrom the remote control Selecting different sources for picture and soundSignal and speaker indicators on the display Basic adjustment auto memoryTurning Off the Sounds Temporarily-MutingSelecting the Analog or Digital Input Mode Basic SettingsSetting the Speaker Information Remote Register whether you have connected a subwoofer or notSubwoofer information Select the unit Unit with the current setting Appears on the displayPress Control UP /DOWN Select the appropriate speaker DistancePress Setting repeatedly until LFE Setting* appears on the displaySelect the low frequency effect attenuator level Select the appropriate compression levelAdjusting the Front Speakers Sound AdjustmentsAdjusting the Subwoofer Output Level Output BalanceTuning in Stations Manually Using Preset TuningTuner Operations Selecting the FM Reception Mode Dolby Surround Creating Realistic Sound FieldsDTS Digital Surround Typical Multichannel 5.1 ch reproductionAll Channel Stereo DAP Digital Acoustic Processor modesAll Channel Stereo reproduction Creating sound fieldTurning on or off the Surround modes About Relations between Speaker Layout and Surround ModesSelecting the Surround modes Speaker Layout Available Surround modesActivate Surround mode If you like to adjust sound, go to stepPress Surround ON/OFF to Press Test to check if you can hear Setting the analog or digital input mode forSounds through all the speakers at Equal level Press Control UPUsing DAP Modes and All Channel Stereo Press the play 3 button on the CD player Compu Link Remote Control SystemSynchronized Recording Automatic Source SelectionOperating JVC’s Audio/Video Components Sound AdjustmentOperating Audio Components TunerCD changer Cassette deckCD recorder Operating Video Components DVD playerBefore operating, set TV/CATV selector to TV Operating Other Manufacturers’ Video Equipment To change the transmittable signals for operating a TVTry to operate your TV by pressing Try to operate your Catv converter by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandTry to operate your DVD player by pressing Manufacturers’ codes for VCRProblem Possible Cause Solution TroubleshootingPer channel, min. RMS, driven into 8 Ω SpecificationsHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents