JVC RX-5022VSL, RX-5020VBK manual Operating JVC’s Audio/Video Components

Page 64

Operating JVC’s Audio/Video Components

You can use the remote control to operate other JVC’s

Sound Adjustment

components.

You can always perform the following operations:

 

 

 

 

Operating Audio Components

 

SURROUND ON/OFF : Turn on or off the Surround modes.

 

 

SURROUND MODE : Select the Surround modes.

English

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 24) in addition to the connections using cables with RCA pin plugs (see page 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 8.)

•Refer also to the manuals supplied with your audio components.

TV CATV

A/V CONTROL

STANDBY/ON

 

 

RECEIVER

 

TEST

 

CENTER

AUDIO

1

 

2

3

 

EFFECT

 

REAR L

TV/CATV

 

 

 

 

4

 

5

6

 

MENU

 

REAR R

VCR

 

 

 

 

7/P

 

8

9

 

ENTER

 

SUBWOOFER

DVD

10

 

0

10

 

RETURN

 

 

100

SLEEP

SOUND

 

 

REW

 

 

FF

REC PAUSE

 

 

CD–DISC

TAPE/CDR

 

CD

DVD

 

 

 

 

 

ANALOG

FM/AM

TV SOUND

VCR

/DIGITAL

FM MODE

 

 

 

 

 

 

 

ON/OFF

 

 

TV/VIDEO SURROUND

MUTING

 

 

 

MODE

 

VCR CH

TV/CATV CH TV VOLUME

VOLUME

REMOTE CONTROL RM - SRX5020J

After pressing SOUND, you can use the following buttons for sound adjustment:

SUBWOOFER +/–

: Adjust the subwoofer output level.

CENTER +/–

: Adjust the center speaker output level.

 

 

REAR•L +/–

: Adjust the left rear speaker output level.

REAR•R +/–

: Adjust the right rear speaker output level.

 

 

EFFECT

: Select the DAP effect level.

TEST

: Turn on or off the test tone output.

 

 

Note:

After adjusting sounds, press the corresponding source selecting button or CD-DISC to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

Tuner

You can always perform the following operations:

FM/AM

: Alternate between FM and AM.

FM MODE

: Change the FM reception mode.

 

 

After pressing FM/AM, you can use the following buttons for tuner operations:

1 – 10, +10: Select a preset channel number directly.

• For channel number 5, press 5.

• For channel number 15, press +10, then 5.

• For channel number 20, press +10, then 10.

CD player

After pressing CD, you can use the following buttons for CD operations:

3

: Start playback.

4

: Return to the beginning of the current

 

(or previous) track.

 

 

¢

: Skip to the beginning of the next track.

7

: Stop playback.

 

 

8

: Pause playback. To release it, press 3.

1 – 10, +10

: Select a track number directly.

 

• For track number 5, press 5.

 

• For track number 15, press +10, then 5.

 

• For track number 20, press +10, then 10.

 

 

25

Page 63 Page 65
Image 64
Page 63 Page 65
Contents RX-5020VBK / RX-5022VSL Mises en garde, précautions et indications diverses Table of Contents Parts Identification Remote ControlFront Panel Before Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Replace the coverAM antenna connection Connecting the FM and AM AntennasFM antenna connection Connecting the Speakers Speaker layout diagramConnecting the front, center and rear speakers Connecting the subwoofer speakerAnalog connections Audio component connections Connecting Audio/Video ComponentsVideo component connections Connecting the Power Cord Plug the power cord into an AC outletDigital connections DVD playerTurning On the Power Basic OperationsSelecting the Source to Play Changing the source nameListening Only with Headphones Adjusting the VolumeFrom the remote control Selecting different sources for picture and soundBasic adjustment auto memory Signal and speaker indicators on the displayTurning Off the Sounds Temporarily-MutingBasic Settings Selecting the Analog or Digital Input ModeRegister whether you have connected a subwoofer or not Setting the Speaker Information RemoteSubwoofer information Unit with the current setting Appears on the display Select the unitPress Control UP /DOWN Select the appropriate speaker DistanceSetting* appears on the display Press Setting repeatedly until LFESelect the low frequency effect attenuator level Select the appropriate compression levelSound Adjustments Adjusting the Front SpeakersAdjusting the Subwoofer Output Level Output BalanceUsing Preset Tuning Tuning in Stations ManuallyTuner Operations Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby SurroundDTS Digital Surround Typical Multichannel 5.1 ch reproductionDAP Digital Acoustic Processor modes All Channel StereoAll Channel Stereo reproduction Creating sound fieldAbout Relations between Speaker Layout and Surround Modes Turning on or off the Surround modesSelecting the Surround modes Speaker Layout Available Surround modesIf you like to adjust sound, go to step Activate Surround modePress Surround ON/OFF to Setting the analog or digital input mode for Press Test to check if you can hearSounds through all the speakers at Equal level Press Control UPUsing DAP Modes and All Channel Stereo Compu Link Remote Control System Press the play 3 button on the CD playerSynchronized Recording Automatic Source SelectionSound Adjustment Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCassette deck CD changerCD recorder DVD player Operating Video ComponentsBefore operating, set TV/CATV selector to TV To change the transmittable signals for operating a TV Operating Other Manufacturers’ Video EquipmentTry to operate your TV by pressing Try to operate your Catv converter by pressingIf there are more than one code listed for your brand Try to operate your VCR by pressingTry to operate your DVD player by pressing Manufacturers’ codes for VCRTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionAM tuner FM tuner IHFGeneral Authorized Service Centers Limited Warranty 1201NHMMDWJEIN Recepteur DE Control AUDIO/VIDEO Mises en garde, précautions et indications diverses English Parts Identification Getting Started Getting Started Connecting the Speakers Connecting Audio/Video Components Connecting the Power Cord Basic Operations Listening Only with Headphones Basic Operations UP 5/DOWN ∞ Subwoofer with the current Setting appears on the display Unit with the current setting Appears on the display Setting* appears on the display Subwoofer + UP/DOWN UP/DOWN FM Mode Selecting the FM Reception Mode Creating Realistic Sound Fields Dolby DTS Plii Live Dance Hall Pavilion ALL CH Speaker Using Dolby Pro Logic II, Dolby Digital DTS Digital Surround Turn on Panorama control or off To select the effect level 1 to 5 you want Compu Link Remote Control System Operating JVC’s Audio/Video Components XL-MC100 and XL-MC301 Or previous chapter Echostar General Instrument 02, 03, 04 Skip to the beginning of the next Troubleshooting Specifications Specifications EN, FR 0102NHMMDWJEIN

RX-5020VBK, RX-5022VSL specifications

The JVC RX-5022VSL and RX-5020VBK are remarkable stereo receivers that exemplify JVC's commitment to quality audio engineering and innovative technology. Both models are designed for audiophiles and casual listeners alike, offering a range of features that enhance the listening experience.

The RX-5022VSL is a versatile receiver that delivers a powerful output of 100 watts per channel, ensuring that your music fills the room with rich, clear sound. It boasts an AM/FM tuner with 30 preset stations, making it easy to access your favorite radio shows or music. The built-in phono input allows for direct connection to a turntable, making it an excellent choice for vinyl enthusiasts.

One of the standout features of the RX-5022VSL is its extensive connectivity options. With multiple audio inputs, including AUX and optical, users can easily connect various devices like smartphones, tablets, or CD players. The model also supports Bluetooth connectivity, enabling wireless streaming from compatible devices, which is a game-changer for modern listeners who prefer convenience.

Similarly, the RX-5020VBK is designed for high-fidelity audio performance. While it shares many similarities with the RX-5022VSL, including the powerful output and AM/FM tuner, it stands out with its unique design aesthetics and user-friendly controls. The RX-5020VBK also emphasizes audio clarity with its high-resolution playback capabilities, which deliver exceptional sound quality for both music and movies.

Both models incorporate advanced sound technologies that enhance audio reproduction. The Digital Signal Processor (DSP) offers various sound field options, allowing users to customize their listening experience to suit different genres of music or movie types. Additionally, the integrated Equalizer allows for precise adjustment of sound frequencies to meet personal preferences.

Durability and build quality are notable characteristics of the JVC RX-5022VSL and RX-5020VBK. With robust construction and thoughtfully designed layouts, both receivers promise longevity and reliability. They also come equipped with an easy-to-read display that provides essential information at a glance, along with intuitive controls for effortless operation.

In conclusion, the JVC RX-5022VSL and RX-5020VBK are excellent choices for anyone looking to elevate their audio experience. With their powerful output, extensive connectivity options, and advanced sound technologies, these receivers cater to a wide range of audio needs while embodying the high-quality standard that JVC is known for. Whether you're a home theater aficionado or a music lover, these models deliver impressive performance and versatility.
Top Page Image Contents