JVC RX-884PBK manual Receiving Radio Broadcasts, Using Preset Tuning, To store the preset stations

Page 28

Receiving Radio Broadcasts

English

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40 stations at random.

To store the preset stations

On the front panel only:

1.Tune in the station you want to preset (see page 24).

If you want to store the FM reception mode for this station, select the FM reception mode you want. See page 26 for details.

2. Press TUNER/SEA MEMORY.

TUNER/SEA MEMORY

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3.

Turn MULTI JOG to select a channel number while

 

MULTI JOG

 

 

 

 

the channel number position is flashing.

 

 

 

4.

Press TUNER/SEA MEMORY again while the

 

 

 

 

selected channel number is flashing on the display.

 

 

 

 

The selected channel number stops flashing.

TUNER/SEA MEMORY

 

The station is assigned to the selected channel number.

 

 

 

5.Repeat steps 1 to 4 until you store all the stations you want.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in a preset station

On the front panel:

TUNER PRESET

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for tuner, not for the CD and others. (See page 58.)

1.Press TUNER PRESET.

2.Turn MULTI JOG to select a preset channel.

From the remote control:

1.Press FM/AM.

Each time you press the button, the band alternates between FM and AM.

2.Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

MULTI JOG

FM/AM

CNTR TONE

CNTR

MENU

1

2

3

TEST ENTER

REAR L

 

4

5

6

EFFECT

REAR R

 

7/P

8

9

SEA MODE

SUBWOOFER

Note:

When you use the 10 keys on the remote control, be sure that they are activated for tuner, not for the CD and others. (See

10 0 +10

RETURN FM MODE/MUTE 100+

page 58.)

25

Page 27 Page 29
Image 28
Page 27 Page 29
Contents RX-884PBK Precaución English Español Português Table of Contents Using the DSP Modes Parts Identification Remote ControlFront Panel How to set the voltage selector Getting StartedGeneral LocationsConnecting the FM and AM Antennas Getting StartedFM Antenna Connections AM Antenna ConnectionsConnecting the front speakers Connecting the SpeakersConnecting the rear and center speakers Connecting the subwoofer speakerCase 1 When you connect only one set of front speakers Case 2 When you connect two sets of front speakersAbout the speaker impedance Use front speakers with 4 16 ohm impedanceConnecting Audio/Video Components Analog connectionsAudio Components Video Components Audio component connectionsVideo component connections Video componentsConnecting DVD player Digital connections Digital 1 coaxial ForConnecting the Power Cord To shut off the power completelyPress Power to set it in the Ñoff position Putting Batteries in the Remote ControlFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelAdjusting the Volume Basic OperationsPress one of the source selecting buttons directly Selecting different sources for picture and soundListening only with headphones From the remote control onlyOn the front panel only Attenuating the Input Signal Adjusting the Subwoofer Output LevelDisplay changes to show the current setting Keys are activated for sound adjustmentsBasic Settings Selecting the Input ModeSelecting the DBS tuner as the source Changing the Source NameBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Listening at Low Volume LoudnessDigital Input Digital in Terminal Setting Setting the Speakers for the DSP ModesFront, Center, and Rear Speaker Setting SPK Rear Speaker appears on the displayRear Delay Time Setting Center Delay Time SettingCrossover Frequency Setting Low Frequency Effect Attenuator Setting Dynamic Range Compression SettingTo store the sound settings To recall the sound settingsTo cancel the One Touch Operation function One Touch OperationSetting the AM Tuner Interval Spacing Tuning in Stations ManuallyReceiving Radio Broadcasts To select the 10 kHz intervalUsing Preset Tuning To store the preset stationsTo erase a stored preset station To tune in a preset stationPress FM Mode on the front panel or FM Mode Selecting the FM Reception ModeMute on the remote control Assigning Names to Preset Stations Press Tuner PRESET, while a character you want isFlashing Character is flashing after you have assigned a nameSelecting Your Favorite SEA Mode Using the SEA ModesTo cancel the SEA mode Using the SEA Modes Creating Your Own SEA ModeTo recall your own SEA adjustment To erase a stored adjustmentUsing the DSP Modes On the 3D-PHONIC modeOn the DAP mode On Surround modeUsing the DSP Modes Using the 3D-PHONIC ModesPress DSP Mode Turn Multi JOG until the mode 3D Action or 3DTo cancel the 3D-PHONIC mode As you turn it, the effect level changes as followsPress Surround Mode repeatedly until the mode 3D Action or 3D DIGITAL, 3D DRAMA, or 3D TheaterYou want appears on the display Press Effect to select the effect levelUsing the DAP Modes To cancel the DAP mode Press Surround Mode repeatedly until the mode youAdjust the speaker output levels as follows Want appears on the displayPress Surround Mode repeatedly until PRO Logic Using the Dolby Digital and Dolby Pro Logic ModesOr Dolby Digital appears on the display To cancel the Surround mode Press Test to start checking the speaker output balancePress Test again to stop the test tone Press Cntr Tone to select the center tone level you wantPress Dolby Surround so that the lamp on the button Lights upTurn Multi JOG to select the center tone level you want Press Dolby Surround again so that Surround OFF appearsUsing the Theater Surround Mode Center tone adjustment affects the mid-frequency To cancel the Theater Surround modeDSP and Theater indicators also light up on the display SOFT2 SOFT1 Flat SHARP1 Using the On-Screen Menus When you select OSD, seeSelecting the Source to Play Also see Selecting the Different Sources for Picture and SoundAdjusting the Front Speaker Output Balance Also see Listening at Low Volume Loudness Also seeAttenuating the Input Signal Also see Sound Control menu appears on the TVUsing the On-Screen Menus Adjusting the Subwoofer Output Level Also seeFor 3D-PHONIC modes For DAP modes Live CLUB, Dance CLUB, HALL, PavilionSelecting Your Favorite SEA Mode Also see For Dolby Surround Pro LogicFor Dolby Digital For Theater Surround and Digital Theater SurroundBasic Settings Creating Your Own SEA Mode Also seePress SET to store the setting into the SEA Usermode Storing the Preset Stations Also see Operating the TunerCharacter entry screen appears Assigning Names to the Preset Stations Also seeTuner Control menu appears again Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverAutomatic Source Selection Synchronized RecordingText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Additional FunctionsOperations Showing the Disc Information on the TV ScreenText Compu Link Remote Control System Searching a Disc Only for the CD playerSearch a disc by its performer Search a disc by its disc titleGoing back to the Disc Title Search screen Press Exit Search a disc by its genrePress on Screen Control %/ Þ to move to GENRE, then press Genre Search screen appearsUser File screen appears on the TV Using your own User FilesGoing back to the User File screen Press Exit Entering the Disc Information For the CD Player with the disc memory functionTitle Input Performer screen appears on the TV To move to Shift , then press SETEnter the disc title, referring to steps 3 and 4 on For the MD recorderEnter the song title, referring to steps 3 and 4 on Operating JVC’s Audio/Video Components Operating JVC’s Audio/Video Components CD player-changerTurntable Cassette deckREC VCR1 the VCR connected to the VCR1 jacksDVD player Sets the input mode either TV or Adjusts the volumeTurns on or off the TV Operating Other Manufactures’ Components Try to operate your TV by pressing TV/CATV/DBSOperating Other Manufactures’ Components 10, 0, 100++10Pauses Starts playbackTry to operate your VCR by pressing VCR1 Manufacturers’ codes for TV Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierVideo Important for mains AC line

RX-884PBK specifications

The JVC RX-884PBK is a powerful and versatile audio receiver that has garnered attention for its impressive features tailored to both casual listeners and dedicated audiophiles. Designed with a sleek and modern aesthetic, this receiver fits seamlessly into any home entertainment setup, delivering high-quality sound and an array of functionalities.

One of the standout features of the JVC RX-884PBK is its multi-channel audio support. This receiver is capable of delivering immersive surround sound, making it an excellent choice for home theater enthusiasts. With support for formats such as Dolby Digital and DTS, users can experience cinema-like audio directly in their living rooms, enhancing movies, music, and gaming experiences.

Power output is another highlight of the RX-884PBK, boasting significant wattage per channel that ensures clear and powerful audio across various speaker configurations. Whether you have a compact stereo setup or a full-fledged surround sound system, the receiver has the capacity to drive speakers effectively, providing dynamic range and depth in audio playback.

Connectivity is a crucial aspect of modern receivers, and the RX-884PBK does not disappoint. It offers multiple inputs, including analog, optical, and coaxial connections, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The built-in phono input also caters to vinyl enthusiasts, enabling direct connection to turntables for an authentic listening experience.

In terms of user interface, the JVC RX-884PBK features an intuitive control system that makes navigating through settings and configurations easy. The remote control adds an extra layer of convenience, allowing users to adjust settings from across the room without the need to get up.

Moreover, the receiver incorporates advanced technologies aimed at enhancing sound quality. With features such as digital signal processing, it can optimize audio playback for different environments. The equalizer settings provide users with the flexibility to customize sound according to personal preferences or specific genres.

In summary, the JVC RX-884PBK is a feature-rich audio receiver that caters to a wide range of listening preferences. Its powerful performance, extensive connectivity options, and user-friendly interface make it an ideal choice for anyone looking to elevate their home audio experience. Whether for movies, music, or gaming, this receiver is designed to deliver exceptional sound quality and enjoyment.
Top Page Image Contents