JVC RX-884PBK manual Selecting the FM Reception Mode, Press FM Mode on the front panel or FM Mode

Page 29

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, set the FM reception mode to “MONO.” (When shipped from the factory, this mode has been set to “AUTO.”)

You can change the FM reception mode while receiving an FM broadcast.

Press FM MODE on the front panel or FM MODE/

FM MODE

SUBWOOFER

MUTE on the remote control.

 

0

 

 

 

 

 

Each time you press the button, the FM reception mode

 

FM MODE/MUTE

alternates between “AUTO” and “MONO.”

 

 

 

 

 

 

 

 

 

 

AUTO:

When a program is broadcasted in stereo, you will hear stereo

 

 

sound; when in monaural, you will hear monaural sounds. This

 

 

mode is also useful to suppress static noise between stations.

 

 

The MUTE AUTO indicator lights up on the display.

 

 

 

 

 

 

 

 

 

MONO:

Reception will be improved although you will lose the stereo effect.

 

 

In this mode, you will hear noise while tuning into the stations.

 

 

The MUTE AUTO indicator goes off on the display.

 

 

 

 

 

 

 

 

 

 

English

Notes:

•You can store the FM reception mode for each preset station.

•When using the FM MODE/ MUTE button, be sure that the 10 keys are activated for tuner, not for the CD and others. (See page 58.)

26

Page 28 Page 30
Image 29
Page 28 Page 30
Contents RX-884PBK Precaución English Español Português Table of Contents Using the DSP Modes Front Panel Remote ControlParts Identification Getting Started How to set the voltage selectorGeneral LocationsGetting Started Connecting the FM and AM AntennasFM Antenna Connections AM Antenna ConnectionsConnecting the Speakers Connecting the front speakersConnecting the subwoofer speaker Connecting the rear and center speakersCase 2 When you connect two sets of front speakers Case 1 When you connect only one set of front speakersAbout the speaker impedance Use front speakers with 4 16 ohm impedanceAnalog connections Connecting Audio/Video ComponentsAudio Components Video Components Audio component connectionsVideo components Video component connectionsConnecting DVD player Digital 1 coaxial For Digital connectionsTo shut off the power completely Connecting the Power CordPress Power to set it in the Ñoff position Putting Batteries in the Remote ControlTurning the Power On and Off Standby From the remote controlBasic Operations On the front panelBasic Operations Adjusting the VolumePress one of the source selecting buttons directly Selecting different sources for picture and soundOn the front panel only From the remote control onlyListening only with headphones Adjusting the Subwoofer Output Level Attenuating the Input SignalDisplay changes to show the current setting Keys are activated for sound adjustmentsSelecting the Input Mode Basic SettingsSelecting the DBS tuner as the source Changing the Source NameAdjusting the Front Speaker Output Balance Basic SettingsSetting the Subwoofer Information Listening at Low Volume LoudnessSetting the Speakers for the DSP Modes Digital Input Digital in Terminal SettingFront, Center, and Rear Speaker Setting SPK Rear Speaker appears on the displayCrossover Frequency Setting Center Delay Time SettingRear Delay Time Setting Dynamic Range Compression Setting Low Frequency Effect Attenuator SettingTo recall the sound settings To store the sound settingsTo cancel the One Touch Operation function One Touch OperationTuning in Stations Manually Setting the AM Tuner Interval SpacingReceiving Radio Broadcasts To select the 10 kHz intervalTo store the preset stations Using Preset TuningTo erase a stored preset station To tune in a preset stationMute on the remote control Selecting the FM Reception ModePress FM Mode on the front panel or FM Mode Press Tuner PRESET, while a character you want is Assigning Names to Preset StationsFlashing Character is flashing after you have assigned a nameTo cancel the SEA mode Using the SEA ModesSelecting Your Favorite SEA Mode Creating Your Own SEA Mode Using the SEA ModesTo recall your own SEA adjustment To erase a stored adjustmentOn the 3D-PHONIC mode Using the DSP ModesOn the DAP mode On Surround modeUsing the 3D-PHONIC Modes Using the DSP ModesPress DSP Mode Turn Multi JOG until the mode 3D Action or 3DAs you turn it, the effect level changes as follows To cancel the 3D-PHONIC modeAction or 3D DIGITAL, 3D DRAMA, or 3D Theater Press Surround Mode repeatedly until the mode 3DYou want appears on the display Press Effect to select the effect levelUsing the DAP Modes Press Surround Mode repeatedly until the mode you To cancel the DAP modeAdjust the speaker output levels as follows Want appears on the displayOr Dolby Digital appears on the display Using the Dolby Digital and Dolby Pro Logic ModesPress Surround Mode repeatedly until PRO Logic Press Test to start checking the speaker output balance To cancel the Surround modePress Test again to stop the test tone Press Cntr Tone to select the center tone level you wantLights up Press Dolby Surround so that the lamp on the buttonTurn Multi JOG to select the center tone level you want Press Dolby Surround again so that Surround OFF appearsUsing the Theater Surround Mode To cancel the Theater Surround mode Center tone adjustment affects the mid-frequencyDSP and Theater indicators also light up on the display SOFT2 SOFT1 Flat SHARP1 When you select OSD, see Using the On-Screen MenusSelecting the Source to Play Also see Selecting the Different Sources for Picture and SoundListening at Low Volume Loudness Also see Adjusting the Front Speaker Output Balance Also seeAttenuating the Input Signal Also see Sound Control menu appears on the TVAdjusting the Subwoofer Output Level Also see Using the On-Screen MenusFor 3D-PHONIC modes For DAP modes Live CLUB, Dance CLUB, HALL, PavilionFor Dolby Surround Pro Logic Selecting Your Favorite SEA Mode Also seeFor Dolby Digital For Theater Surround and Digital Theater SurroundPress SET to store the setting into the SEA Usermode Creating Your Own SEA Mode Also seeBasic Settings Operating the Tuner Storing the Preset Stations Also seeTuner Control menu appears again Assigning Names to the Preset Stations Also seeCharacter entry screen appears Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemAutomatic Source Selection Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Additional FunctionsShowing the Disc Information on the TV Screen OperationsSearching a Disc Only for the CD player Text Compu Link Remote Control SystemSearch a disc by its performer Search a disc by its disc titleSearch a disc by its genre Going back to the Disc Title Search screen Press ExitPress on Screen Control %/ Þ to move to GENRE, then press Genre Search screen appearsGoing back to the User File screen Press Exit Using your own User FilesUser File screen appears on the TV For the CD Player with the disc memory function Entering the Disc InformationTitle Input Performer screen appears on the TV To move to Shift , then press SETEnter the song title, referring to steps 3 and 4 on For the MD recorderEnter the disc title, referring to steps 3 and 4 on Operating JVC’s Audio/Video Components CD player-changer Operating JVC’s Audio/Video ComponentsTurntable Cassette deckDVD player VCR1 the VCR connected to the VCR1 jacksREC Turns on or off the TV Adjusts the volumeSets the input mode either TV or Try to operate your TV by pressing TV/CATV/DBS Operating Other Manufactures’ Components10, 0, 100++10 Operating Other Manufactures’ ComponentsTry to operate your VCR by pressing VCR1 Starts playbackPauses Manufacturers’ codes for TV Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsVideo Important for mains AC line

RX-884PBK specifications

The JVC RX-884PBK is a powerful and versatile audio receiver that has garnered attention for its impressive features tailored to both casual listeners and dedicated audiophiles. Designed with a sleek and modern aesthetic, this receiver fits seamlessly into any home entertainment setup, delivering high-quality sound and an array of functionalities.

One of the standout features of the JVC RX-884PBK is its multi-channel audio support. This receiver is capable of delivering immersive surround sound, making it an excellent choice for home theater enthusiasts. With support for formats such as Dolby Digital and DTS, users can experience cinema-like audio directly in their living rooms, enhancing movies, music, and gaming experiences.

Power output is another highlight of the RX-884PBK, boasting significant wattage per channel that ensures clear and powerful audio across various speaker configurations. Whether you have a compact stereo setup or a full-fledged surround sound system, the receiver has the capacity to drive speakers effectively, providing dynamic range and depth in audio playback.

Connectivity is a crucial aspect of modern receivers, and the RX-884PBK does not disappoint. It offers multiple inputs, including analog, optical, and coaxial connections, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The built-in phono input also caters to vinyl enthusiasts, enabling direct connection to turntables for an authentic listening experience.

In terms of user interface, the JVC RX-884PBK features an intuitive control system that makes navigating through settings and configurations easy. The remote control adds an extra layer of convenience, allowing users to adjust settings from across the room without the need to get up.

Moreover, the receiver incorporates advanced technologies aimed at enhancing sound quality. With features such as digital signal processing, it can optimize audio playback for different environments. The equalizer settings provide users with the flexibility to customize sound according to personal preferences or specific genres.

In summary, the JVC RX-884PBK is a feature-rich audio receiver that caters to a wide range of listening preferences. Its powerful performance, extensive connectivity options, and user-friendly interface make it an ideal choice for anyone looking to elevate their home audio experience. Whether for movies, music, or gaming, this receiver is designed to deliver exceptional sound quality and enjoyment.
Top Page Image Contents