
12. Assemble lanyard (25) to locking pin (24) as shown (FIG A). Attach covers (22) onto pole mount bracket (15) with carriage bolt (23) and nut (14) as shown.
FIG. A
25
14 | 22 |
15
22
24
23
25
24
IMPORTANT!
Loop end of pin lanyard (25) over carriage bolt (23) as it passes through the pole mount bracket (15) during this
assembly.
25
![]()
![]()
![]()
24
23
13.
Insert handle assembly through pole mount assembly as shown. Lock pole assembly in place at the 10’ (3.05 m) mark with pin (24).
24
19 | 02/06 | ID# M661144 |