JVC RX-DP20VBK Canceling the Zone 1 Operations, Selecting the Zone 1 Source to Play, Setting on

Canceling the Zone 1 Operations

To stop Zone 1 operations and sounds from the Zone 1 speakers,

press ZONE 1 ON/OFF so that the ZONE 1 ON/OFF lamp goes off.

ZONE 1

ON/OFF	ZONE 1
	ON/OFF

On the unit From the remote control

The currently selected front speakers indicator(s) also go(es) off from the display (no sound will be heard in Zone 1).

To use this receiver for Zone 1 operations again, press ZONE 1 ON/OFF again (the ZONE 1 ON/OFF lamp lights up). The front speakers indicator(s) previously selected light(s) up. Now the buttons and controls on the unit work for Zone 1 operations.

Notes:

•If you have turned off Zone 1 with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on Zone 1.

•If “TURN ON ZONE1 OR ZONE2” appears on the display, press ZONE 1 ON/OFF or ZONE 2 ON/OFF to listen to the sound in Zone 1 or in Zone 2; otherwise, the receiver will turn off after about 1 minute.

Selecting the Zone 1 Source to Play

Press one of the source selecting buttons.

•The selected source name and Surround/THX/DSP mode also appear on the display.

DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH

DVD : Selects the DVD player.

DVD MULTI : Selects the DVD player for viewing a digital video

	disc using the analog discrete output mode (5.1-
	channel reproduction).
	To use the DVD MULTI playback mode, see page 60.
VCR 1	: Selects the video component connected to the VCR 1
	IN jacks.
VCR 2	: Selects the video component connected to the VCR 2
	IN jacks.
TV/DBS	: Selects TV sound (or the DBS tuner).
VIDEO	: Selects the video component connected to the VIDEO
	jacks.
CD*	: Selects the CD player.
PHONO*	: Selects the turntable.
TAPE/MD*	: Selects the cassette deck (or the MD recorder).
CDR*	: Selects the CD recorder.
FM/AM*	: Selects the tuner.
	Each time you press the button, the band alternates
	between FM and AM.
EXT 7.1CH	: Selects the external component connected to the EXT
	7.1CH IN jacks.
	To use the EXT 7.1CH playback mode, see page 60.

Notes:

•When connecting an MD recorder (to the TAPE/MD IN jacks), and a DBS tuner (to the TV SOUND/DBS IN jacks), change the source names shown on the display. For details, see “Changing the Source Name” on page 27.

•When you press one of the audio source selecting buttons on the remote control marked with an asterisk (*), the receiver automatically turns on. If you turn on the receiver with the ZONE 1/ ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 2,” press ZONE 1 ON/OFF to activate Zone 1 operations.

–If you press one of the audio source selecting buttons on the remote control with the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1” while the receiver is turned on but Zone 1 is turned off, Zone 1 is turned on with the audio source selected.

Speaker and signal indicators on the display

By checking the following indicators, you can easily confirm which speakers you are activating and which signals are coming into this receiver.

On the unit

DVD	DVD MULTI	PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM/AM	EXT 7.1CH

Speaker indicators

L C R

SUBWFR

LS RS

SB

Signal indicators

L C R

LFE

LS S RS

SB

		From the remote control
		Selected source name
ANALOG		SPEAKERS 1
L	R
SUBWFR		VOLUME

dB

The current Surround/THX/DSP mode appears.

What speaker indicators light depends on the speaker setting (for details, see “1 Setting the Speakers—SPEAKER

SETTING” on page 38).

•The frames of “L,” “C,” “R,” “LS,” “RS, ” and “SB” light up, when the corresponding speakers are set to “LARGE” or “SMALL” and when the speaker is required for the Surround/ THX/DSP mode currently selected.

•When “SUBWOOFER” is set to “YES,” SUBWFR lights up.

•All three frames on the row of “SB” are not used at the same time. When “SURR BACK OUT” is set to “2SPK,” the left and the right ones are used. When it is set to “1SPK,” the middle one is used.

23