JVC RX-DP20VBK Press Zone 2 ON/OFF so that, Zone 2 ON/OFF lamp lights up, Turn Master Volume to

Basic Operating Procedure for Zone 2

The sources and functions available for the Zone 2 operations are limited.

For more details on the Zone 2 operations, see “Zone 2 (Sub- room) Operations” on pages 29 to 32.

On the unit:

1. Press (STANDBY/ON).

The STANDBY lamp goes off, and the ZONE 1 ON/OFF lamp lights up.

The front door moves down so that the source selecting buttons appear, and the buttons and controls on the unit work for the Zone 1 operations.

•For more details, see “Turning the Power On and Off (Standby) and Selecting the Zone 2 Operations” on page 29.

STANDBY

	ZONE 1
STANDBY / ON	ON/OFF

2. Press ZONE 2 ON/OFF so that the	ZONE 2
ZONE 2 ON/OFF lamp lights up.	ON/OFF

3. Press DOOR DOWN so that you can

use the other buttons inside the front door.

DOOR

DOWN

To close the front door, press

DOOR UP once or twice.

The front door moves up in two steps.

ZONE 2

4. Press ZONE 2 CONTROL so that CONTROL

“ZONE 2” and the previously selected Zone 2 source name appear on the display.

Now the buttons and controls on the unit work for the Zone 2 operations.

SPEAKERS 1 ZONE 2

VOLUME

dB

6. Turn MASTER VOLUME to		MASTER VOLUME
adjust the volume level of the
sound through the Zone 2 front
speakers.
Note:	Down	Up

When “ZONE2PREOUT” is set to “FIX” on the ZONE 2/ SPEAKERS 2 submenu (see page 43), the MASTER VOLUME control will not work for adjusting the volume level of the sound through the ZONE2 PREOUT jacks.

From the remote control:

When operating the receiver using the remote control, the display on the unit always shows the Zone 1 source information though you are operating it for the Zone 2 source.

1. Set ZONE 1/ZONE 2 (LEARN/

LEARN TRANSMIT

TRANSMIT) selector to “ZONE 2.”

Now the buttons and controls on the remote

ZONE 1 ZONE 2

control work for the Zone 2 operations.

2. Press AUDIO (ON).

The STANDBY lamp on the unit goes off, and the ZONE 2 ON/ OFF lamp on the unit lights up.

STANDBY ON

ZONE 2

ON/OFF

3. Select and play a source.

DVD	DVD MULTI	PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM/AM	EXT 7.1CH

The sound comes out of the Zone 2 front speakers.

•If no sound comes out of the Zone 2 front speakers, see page 32.

Notes:

•You cannot select “DVD MULTI” and “EXT 7.1CH” for Zone 2.

•When “TV” has been assigned as the source to the TV/DBS button, it does not work. To change the source name, see “Changing the Source Name” on page 27.

The last Zone 2 source appears.	The Zone 2 volume
5. Select and play a source.	level appears.

The sound comes out of the Zone 2 front speakers.

•If no sound comes out of the Zone 2 front speakers, see page 32.

DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO CD PHONO TAPE/MD CDR FM/AM EXT 7.1CH

Notes:

•You cannot select “DVD MULTI” and “EXT 7.1CH” for Zone 2.

•When “TV” has been assigned as the source to the TV/DBS button, it does not work. To change the source name, see “Changing the Source Name” on page 27.

4. Press VOLUME +/– to adjust the

volume level of the sound through VOLUME the Zone 2 front speakers.

Note:

When “ZONE2PREOUT” is set to “FIX” on the ZONE 2/ SPEAKERS 2 submenu (see page 43), the VOLUME +/– control will not work for adjusting the volume level of the sound through the ZONE2 PREOUT jacks.

21