JVC RX-DP20VBK manual One-Touch DVD Play, Automatic Power On/Off Standby

Page 73

One-Touch DVD Play

Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other switches manually.

When you press PLAY on the remote control supplied for this receiver for operating the DVD player, the receiver automatically turns on and changes the Zone 1 source or Zone 2 source, depending on the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector setting on the remote control, to the appropriate input—“DVD” or “DVD MULTI” as the Zone 1 source, and “DVD” as the Zone 2 source.

For Zone 1 operations: The Zone 1 TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

•When the DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiver automatically turns on and changes the source to “DVD” or “DVD MULTI.”

–If the receiver is already turned on with the ZONE 2 ON/OFF lamp on the unit lit, and Zone 2 source name is shown on the display, the receiver changes the Zone 2 source to “DVD.” In this case, the Zone 2 TV will not turn on.

•When the DVD player is connected through the digital input terminal on this receiver (and digital input is selected), the receiver automatically turns on and changes the Zone 1 source to “DVD.”

–If the receiver is already turned on with the ZONE 2 ON/OFF lamp on the unit lit, and Zone 2 source name is shown on the display, the receiver changes the Zone 2 source to “DVD.” (If no analog connection is made for the DVD player, no sound comes out of the Zone 2 front speakers).

Automatic Selection of TV’s Input Mode (Only for Zone 1 Operations)

•When you select “TV” as the Zone 1 source to play on the receiver, the Zone 1 TV automatically changes the input mode to the TV tuner so that you can watch the Zone 1 TV.

•When you select “DVD,” “DVD MULTI,” “VCR 1,” “VCR 2,” “VIDEO” or “DBS” as the Zone 1 source to play on the receiver, the Zone 1 TV automatically changes the input mode to the appropriate position (either Video Input 1 or Video Input 2) so that you can view the playback picture.

Notes:

•When you select “TV” as the source on the receiver, you cannot see the menu on the TV screen since the AV COMPU LINK remote control system automatically changes the TV’s input mode to the TV tuner.

If you do not mind stopping listening to the TV sounds, you can then show the on-screen displays after changing the TV’s input mode to the appropriate position (either Video Input 1 or Video Input 2) the receiver is connected to.

•This function does not work when you connect this receiver and the TV with the AV COMPU LINK EX terminal using the component video cables. To use this function, connect this receiver and the TV using the S-video or composite video cables.

Automatic Power On/Off (Standby)

Automatic Power On:

The Zone 1 TV, VCR 1 (the VCR connected to the VCR 1 jacks), and DVD player turn on and off along with the receiver.

• When you turn on the receiver by pressing (STANDBY/ ON) on the front panel, or AUDIO (ON) on the remote control with the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 1”:

OR

When you turn on the Zone 1 sound by pressing ZONE 1 ON/OFF while the receiver is turned on:

The ZONE 1 ON/OFF lamp on the unit lights up and the source name for Zone 1 appears on the display, and;

–If the previously selected Zone 1 source is “VCR 1,” the Zone 1 TV and VCR 1 will turn on automatically.

–If the previously selected Zone 1 source is “DVD” or “DVD MULTI,” the Zone 1 TV and DVD player will turn on automatically.

–If the previously selected Zone 1 source is “VIDEO,” “VCR 2,” “TV” or “DBS,” only the Zone 1 TV will turn on automatically.

•When you turn on the receiver by pressing

AUDIO (ON) on the remote control with the ZONE 1/ZONE

2 (LEARN/TRANSMIT) selector set to “ZONE 2”:

OR

When you turn on the Zone 2 sound by pressing ZONE 2 ON/OFF while the receiver is turned on:

The ZONE 2 ON/OFF lamp lights up, and —

–If the previously selected Zone 2 source is “VCR 1,” the VCR 1 will turn on automatically.

–If the previously selected Zone 2 source is “DVD,” the DVD player will turn on automatically.

–If the previously selected Zone 2 source is “VIDEO,” “VCR 2,” or “DBS,” nothing happens.

Automatic Power Off (Standby):

•When you turn off the receiver by pressing (STANDBY/ ON) on the unit or AUDIO (STANDBY) on the remote control, the Zone 1 TV, VCR 1 and the DVD player will turn off

(standby).

•When you turn off the Zone 1 sound by pressing

ZONE 1 ON/OFF, the selected Zone 1 source component turns off (unless the same component is selected as the Zone 2 source), and the Zone 1 TV also turns off.

–If the ZONE 2 ON/OFF lamp is lit, nothing happens.

•When you turn off the Zone 2 sound by pressing

ZONE 2 ON/OFF, the selected Zone 2 source component turns off (unless the same component is selected as the Zone 1 source).

–If the ZONE 1 ON/OFF lamp is lit, nothing happens.

Note:

If you turn off the receiver by pressing (STANDBY/ON) on the

unit or AUDIO (STANDBY) on the remote control, or if you turn off the Zone 1 sound by pressing ZONE 1 ON/OFF while recording on the VCR 1, the VCR 1 will not turn off, but continue recording.

70

Page 72 Page 74
Image 73
Page 72 Page 74
Contents LVT0965-001AJ RX-DP20VBK23.5 kg / 52.0 lb For the main unit Introduction Features PrecautionsTable of Contents Front Panel Parts IdentificationDisplay Window To open the front doorAnalog indicator Dual indicatorDgtl Auto indicator 96/24 indicatorRear Panel Remote Control Checking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedBasic connecting procedure Connecting the SpeakersAM Antenna Connections Front speakers Front speakers Center speaker Right / LeftZone 1 speaker layout Front speakers and center speakerPowered Connecting a subwooferEnhance your audio system Left surroundAnalog Connections Connecting Audio/Video ComponentsWhen removing the cover When attaching the front Terminal coverWhen using the digital input terminal External 7.1-channel Output component Decoder Or DVD playerVHS/S-VHS/VHS VCR VCRsDBS tuner TV and/or DBS tunerDVD player When you connect the DVD player with stereo output jacksDVD player Digital output terminal Digital ConnectionsDigital input terminals Find a place where you can attach the IR signal transmitter Using the RF Rod Antenna and IR Signal TransmitterSetting Up the RF Rod Antenna Setting Up the IR Signal TransmitterConnecting the Power Cord Putting Batteries in the Remote ControlWhen using the remote control in the dark Replace the coverMulti-Room Operations Power amplifierRequired Connections for Zone Connection Å Connection ıBasic Operating Procedure for Zone Press Zone 2 ON/OFF so that Turn Master Volume toZone 2 ON/OFF lamp lights up Sound through the Zone 2 front SpeakersTo turn on the power, press Turning the Power On and Off StandbyTo turn off the power into standby mode Zone 1 Main Room OperationsSpeaker and signal indicators on the display Canceling the Zone 1 OperationsSetting on Selecting the Zone 1 Source to PlaySelecting different sources for picture and sound Adjusting the Zone 1 VolumeActivating the Zone 1 Front Speakers Selecting the Analog or Digital Input ModeMode Indicator lights up on the display Attenuating the Input SignalPress and hold Input ATT inside Front door so that the Input ATTMaking Sounds Natural Changing the Display BrightnessTurning Analog Direct On and Off Changing the Source NameBasic adjustment auto memory Using the Sleep TimerPress Sleep repeatedly Recording a SourceZone 2 Sub-room Operations Last Zone Zone 2 volume Source appears Level appearsPress Zone 2 Control inside Front door so that Zone Previously selected ZoneTo stop Zone 2 operations and sounds through Canceling the Zone 2 OperationsZone 2 speakers, press Zone 2 ON/OFF so that To use this receiver for Zone 2 operationsSelected source name Zone 2 volume Level appears Adjusting the Zone 2 VolumeSelecting the Zone 2 Source to Play DVDPress Zone 2 to activate the Zone Activating the Zone 2 Front SpeakersFront speakers Muting the Zone 2 SoundEx. When you press FM/AM With Zone 1/ZONE Tuning in to Stations ManuallyReceiving Radio Broadcasts Press FM/AMSelecting the FM Reception Mode Using Preset TuningSetup Menu Configuration Basic SettingsMenu operation buttons Operation through On-Screen Display MenusButton To do Press Setup Menu Menu Operating ProcedurePress SET Adjusting the Speaker Channel Output Levels-CHANNEL Level Setting the Speakers-SPEAKER SettingYES 1SPKOFF AutoFront L Level Front R LevelSetting the Bass Sounds-SUBWOOFER Setting the Speaker DistanceFor each speaker LFEApart Setting the THX Audio-THX Audio SetupClose Setting the Audio Delay Level-AUDIO Delay Setting the Surround Channel Output Speakers-SURR CH OUTSetting the Digital Input/Output Terminals Selecting the Dual Mono Sound-DUAL MonoSetting the Zone 2/Speakers 2 Usage -ZONE 2/SPEAKER Setting the Video Input TerminalsTurning On and Off the Video Output PCMSuperimposing the Menus-SUPERIMPOSE Memorizing the Volume Level for Each Source-ONE Touch OPEShowing the Text Information on the Display-FL Display TextAdjustment Menu Configuration Sound AdjustmentsDisplay or erase the Adjustment Menu Adjust MenuSelect a submenu on the Adjustment Menu Or an item on a submenu downwards orPress fi or % Down or UP repeatedly Press Adjust MenuTo select the desired submenu Set other items on the same submenu if necessarySubmenu items Adjustment procedureBass MIDAdjusting the Various Effects Setting the Midnight Mode-MIDNIGHT ModeWhen one of the DSP modes except ALL CH Stereo is activated When Neo6 Music is activated When Dolby Pro Logic II Music is activatedPress Liveness repeatedly to adjust Overall level of the effect 1 toReproducing Theater Ambience Using the Surround and THX ModesIntroducing the Surround and THX Modes Dolby Pro Logic Dolby Digital EXDTS Digital Surround DTS Extended Surround DTS-ESZone Surround and THX Modes Applicable to the Various SoftwareES/EX/7.1 Available Available THX Mode Incoming Signal Type 2-channel Available Surround ModeAbout Dialog Normalization Activating the Surround and THX ModesActivating the 7.1-channel reproduction EXES7.1 onTo cancel the Surround mode Press Surround to activate the Surround ModeEx. When Dolby Digital is activated To adjust the speaker output level using the remote controlTo cancel the THX mode without canceling the Surround mode Press THX to activate the THX modeTo cancel the THX and Surround modes 3D Headphone ModeHeadphone Mode Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes To adjust the DSP effectsPress Effect repeatedly to adjust the level Activating the DSP ModesActivating the Analog Multi-channel Using the Analog Multi-channel Playback ModePlayback Modes Cassette deck Compu Link Remote Control SystemMD recorder Supplied for this receiver, the receiverWhen you turn off the Zone 2 source by pressing When you turn off the Zone 1 sound by pressingAt the same time Press the play 3 button on the CD playerRX-DP20VBK Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerDisc Information screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Zone 2 LearnPress % / fi to move to SEARCH, then press Press Text Display while CD is selected as the sourcePress % / fi to move to Performer Then press SET Press SET againPress % / fi to move To GENRE, then Press SET Press % / fi to move to SEARCH, then press SETPress % / fi to move To the genre you Press % / fi to move to Title INPUT, then press SETPress % / fi to move to the genre you want, then press SET Enter the disc title, referring to steps 3Press Text Display while MD is selected as the source Press % / fi to move to Title Input Then press SETConnections 1 IR Signal Transmitter Connection AV Compu Link Remote Control SystemIR signal transmitter Connections 2 AV Compu Link ConnectionCase Connections 3 Video Cable ConnectionOne-Touch Video Play Automatic Power On Automatic Power On/Off StandbyWhen you turn off the Zone 2 sound by pressing One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierCD player-changer CD playerTurntable CD recorderVCR VCR connected to the VCR 1 jacks Operating Video Components¶ REC DVD playerOperating Other Manufacturers’ Equipment Changing the Preset Signal CodesPress and hold VCR Enter a manufacturer’s code usingPress VCR Buttons 1-9,Press and hold Audio Standby Press DVD Enter a manufacturer’s code using buttons 1-9,Release Audio on Release Audio StandbyManufactures’ codes for Catv converter Manufacturer Codes Manufactures’ codes for DBS tuner Manufacturer CodesManufactures’ codes for VCR Manufacturer CodesTo store the signals Storing the Remote Signals ManuallySet the LEARN/TRANSMIT Zone 1/ZONE 2 selector toFor the Zone 1 operations For the Zone 2 operations ControlTo erase the stored signals To use the stored signalsPress the desired button \andProblem Possible Cause Solution TroubleshootingMulti-room operations Zone1/Zone Surround/THXFM/AM CATV/DBSGeneral Output Power SpecificationsAmplifier AudioFM tuner IHF VideoAM tuner GeneralLimited Warranty Authorized Service Centers RX-DP20VBK
Top Page Image Contents