JVC RX-DP20VBK manual Superimposing the Menus-SUPERIMPOSE, Text

7SPEAKER 2

When using the FRONT 2/ZONE 2 SPEAKERS terminals, determine the speaker terminal usage:

SPEAKER 2 : Select to connect the second front speakers in Zone 1.

ZONE 2 SPK : Select to connect the front speakers in Zone 2.

BI-AMP OUT : Select to connect the front speakers in Zone 1 using bi-amplifier connection*.

The BI-AMP indicator (as well as the front speaker 1 indicator) will light up when the front speakers 1 are activated.

Notes:

*If your speaker has two pairs of input terminal (one for the high frequency range and the other for the low frequency range),

you can connect the speakers by using both the FRONT 1 SPEAKERS and FRONT 2/ZONE 2 SPEAKERS terminals on the rear of this unit.

•When “BI-AMP OUT” is selected, the surround back speakers are automatically deactivated. In this case, the SURR CH OUT submenu cannot be adjusted (see page 42).

•When “BI-AMP OUT” is selected, “SURR BACK SP” is set to “NONE” on the SPEAKER SETTING submenu (see page 38).

eSuperimposing the Menus—SUPERIMPOSE

You can select whether or not to superimpose the menus on the playback pictures on the TV screen.

7SUPERIMPOSE

Turn on or off superimpose:

ON : Select to superimpose the menus on the playback pictures on the TV screen.

OFF : Select to cancel superimposition.

Menus will be shown on the blue background screen.

Notes:

•If a video component and this unit are connected only using component cords, Superimpose will not work.

•While Superimpose is in use, the menus may fluctuate or may be distorted depending on the playback pictures.

rShowing the Text Information on the Display—FL DISPLAY

When you have connected an MD recorder or CD player equipped with the TEXT COMPU LINK remote control system (see page 63), you can show text information, such as disc title or track title, on the display of this receiver.

7FL DISPLAY

Turn on or off the text information display.

TEXT : Text information appears during play.

NORMAL : Surround/THX/DSP mode appear during play.

Note:

Though you have selected “TEXT,” the source name and Surround/THX/DSP mode will appear while playing a disc that has no text information.

t Memorizing the Volume Level for Each

Source—ONE TOUCH OPE

This unit memorizes many settings separately for each source (see page 28).

In addition, you can store the volume level for each source together with the other memorized settings.

7ONE TOUCH OPE

Select one of the following to store the volume level for each source:

ON	: Select to store the volume level setting separately for
	each source. (The ONE TOUCH OPERATION
	indicator lights up on the main unit’s display.)

This receiver memorizes the volume level—

•when you turn on the power,

•when you change the source, and

•when you turn on One Touch Operation.

OFF : Select not to store the volume level setting.

To recall the volume level

With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected.

To cancel the One Touch Operation

Set One Touch Operation to “OFF” so that the ONE TOUCH OPERATION indicator goes off.

44