Weider 831.150380, PRO 335 user manual Locknut

Page 10

13.Lubricate an M10 x 75mm Bolt (5). Attach the Backrest Brackets (38) to the Bench Frame (33) with the M10 x 75mm Bolt and an M10 Nylon Locknut (4). Do not overtighten the Nylon

Locknut.

Rest the Backrest Brackets (38) on the Adjustment Tube (37).

14.Attach the Seat (35) to the Bench Frame (33) with two M6 x 16mm Screws (6).

15.Press 3/4” Round Inner Caps (25) into the ends of all three Pad Tubes (27).

Insert a Pad Tube (27) through the indicated hole in the Leg Lever (28). Insert another Pad Tube through the other hole in the Leg Lever. Insert the remaining Pad Tube through the hole in the Front Leg (20).

Slide two Foam Pads (26) onto each Pad Tube (27).

13
		37
			38
				4
		33
		5
		Lubricate
14
			35
		33
	6
15		26
		26
		27	28	26
	26	27	28
	26
	27		25
	25
		27	26
		27
	26	20
	26

10

Image 10

Contents Model No Serial No Patent PendingSEARS, Roebuck and CO., Hoffman ESTATES, IL Table of Contents Full 90 DAY WarrantyImportant Precautions Before YOU Begin Part Identification Chart Following Tools not Included are Required for Assembly AssemblyDo not tighten the Nylon Locknuts yet Page Same manner. The Barbell Lock Pins must be oriented as shown Tighten all M8 Nylon Locknuts 7 used in steps 1, 6,Backrests must be oriented as shown Locknut Page Attaching Weights to the LEG Lever Adjusting the Weider PROAttaching Weights to the Weight Carriage Adjusting the BackrestAttaching the LAT BAR to the High Pulley Station Place the same amount of weight on both ends of the barbellStoring the Weight Bench Locking the BarbellExercise Guidelines Cooling Down Staying MotivatedMuscle Chart Aerobic Exercise Weight Sets Reps Exercise Weight Sets RepsDate Part LIST-Model No Key Part Qty DescriptionExploded DRAWING-Model No QUESTIONS? Model No