Weider 831.153971 user manual

Page 12

23.Attach the Backrest (35) to the Backrest Frame (32) with four M6 x 38mm Screws (105) and four M6 Washers (107).

24.Insert the rod on the Backrest Frame (32) into the slot in the Seat Carriage (44). Hold the Backrest

Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.

25.Attach the Leg Lever (56) to the Leg (5) with a Leg Station Pin (60). Slide a Cotter Pin (113) onto the Leg Station Pin.

23
	35
			107
		107
		32	105
		32
		107
		107
		105
24
	32
	Rod
		Slot
		44
	32
		44
25		5
		5
			113
	56		60
			60

12

Image 12

Contents Visit our website at Model No Serial NoTable of Contents Important Precautions Before YOU Begin Assembly Make Things Easier for YourselfAttach the other Wheel 65 in the same man- ner Page Tighten the 1/2 x 25mm Screw Do not overtighten the Locknut the Rail must Be able to pivot easilyRepeat with the other Squat Arm Page Push the excess Upper Wire Harness 71 into Upright Do not tighten the Locknut yetSure that the upper cable a is between Two Pulleys Bolt yetPage Page Repeat this step with the other High Cable Pulley Housing Adjustments Remove the high pulleys when not in useUsing the LEG Lever Attaching the High PulleysAdjusting the Squat ARM Adjusting the BackrestAttaching the Squat Station Attaching the Accessories Adjusting the SeatStoring the Resistance System Features of the Console Console OperationPlugging in the Resistance System Manual OperationProgram Operation Cable Diagram Upper Cable aTroubleshooting Adjusting the Cable TensionCleaning the BAR Guides Recalibrating the ConsoleExercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification CHART-Model No .153971 R0304A Page Part LIST-Model No Qty DescriptionExploded DRAWING-Model No R0304AFull TEN-YEAR Warranty Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL