Weider 831.153971 user manual Repeat this step with the other High Cable Pulley Housing

Page 13

26.Slide the Pad Tube (50) into the Leg Lever (56). Slide two Large Foam Pads (52) onto the Pad Tube.

Attach the other Pad Tube (50) to the Leg Lever (56) and the Leg (5) in the same manner.

27.Attach a 90mm Pulley (40) inside of the Leg (5) with an M10 x 85mm Button Bolt (92), two M10 Washers (106), two 22mm Spacers (61), and an M10 Nylon Locknut (103).

28.Wrap a High Cable (101) over a 90mm Pulley

(40).Attach the Pulley to a Pulley Housing (39) with an M10 x 44mm Button Bolt (93) and an M10 Nylon Locknut (103).

Repeat this step with the other High Cable

(101)and Pulley Housing (39).

29.Make sure that all parts have been properly tight- ened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page.

26
52
56
5	50
50
	52
27
103	5
106	61
	61
61	106
40	127
40
28
	39
103	93
40	101

Before using the resistance system, turn on the console and change the resistance setting as described in CONSOLE OPERATION on page 18. Refer to TROUBLESHOOTING on page 21 and adjust the Crossbar Cable ten- sion as described.

13

Image 13

Contents Model No Serial No Visit our website atTable of Contents Important Precautions Before YOU Begin Make Things Easier for Yourself AssemblyAttach the other Wheel 65 in the same man- ner Page Tighten the 1/2 x 25mm Screw Be able to pivot easily Do not overtighten the Locknut the Rail mustRepeat with the other Squat Arm Page Do not tighten the Locknut yet Push the excess Upper Wire Harness 71 into Upright Sure that the upper cable a is between Two Pulleys Bolt yetPage Page Repeat this step with the other High Cable Pulley Housing Remove the high pulleys when not in use AdjustmentsUsing the LEG Lever Attaching the High PulleysAdjusting the Backrest Adjusting the Squat ARMAttaching the Squat Station Adjusting the Seat Attaching the AccessoriesStoring the Resistance System Console Operation Features of the ConsolePlugging in the Resistance System Manual OperationProgram Operation Upper Cable a Cable DiagramAdjusting the Cable Tension TroubleshootingCleaning the BAR Guides Recalibrating the ConsoleExercise Guidelines Cooling Down Muscle ChartStaying Motivated Part Identification CHART-Model No .153971 R0304A Page Qty Description Part LIST-Model NoR0304A Exploded DRAWING-Model NoSears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL Full TEN-YEAR Warranty