Weider 831.15973 user manual 74 a

Page 13

25.Remove both 3 1/2" Pulleys (24) from the pre-assem- bled Adjustable Pulley Plates (23).

Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown. Attach the Pulley and a Cable

Trap (25) to the top hole in the two Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon

Locknut (50). Make sure the Cable Trap and the Pulley Plates are oriented as shown.

26.Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown, Attach the Pulley to the Small Pulley Bracket (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50). Make sure the Pulley Bracket is oriented as shown.

27.Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown. Attach the Pulley and a Cable

Trap (25) to the welded bracket on the Butterfly Base

(4)with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut

(50).Make sure the Cable Trap is oriented as shown.

25

J

J

25

23

74A

26

57

t3

Image 13
Contents 800-72,6-6879 Back Cover Arms Four Stages of the Assembly Process Assembly 84 u Page Page 46 ,. ¢U-o=.50 Assembly LOj Direction shown. Attach the Pulley to 74 a Page Page Page Page Page Page Locate and open the parts bag labeled Seat 43 30 Tube Do notallowchildren onor around machine Replacelabelif 72, 389.5 c Press Cable 711 Page Page At the end of the Ab re-attachthe =U 1RetainerRing31 \\\\\\\l Key No. Qty Descdptlon 6450 Sears