56.Apply the WELDER PRO 9940 decal in the location shown. Important: The warning decals shown below have been attached to the home gym in the locations shown. If a decal is missing or illegible, please
call our customer hotline at the number on the front cover of this manual to order a replacement decal. Apply the new decal in the appropriate location.
56
may resultinserious injury.
• Readuser'smanual andfollow all warnings andoperatinginstruc- tionspriorto use.
• Do notallowchildren onor around machine.
• Replacelabelif
damaged,illegible,or removed.
57.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENT, beginning on page 25 of this manual.
Before using the home gym, pull each cable a few times to make sure that the cables move smoothlyover the pulleys. If one of the cables does not move smoothly,find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See TROUBLE- SHOOTING AND MAINTENANCE on page 26.
22