Weider 831.159530 user manual

25.Wrap the Press Cable (80) around a “V”-Pulley (38). Attach the Pulley to the Press Upright (6) with a 3/8” x 3 3/4” Bolt (62), a 3/8” Washer (75), and a 3/8” Nylon Locknut (74).

26.Wrap the Press Cable (80) around a 3 1/2” Pulley (37). Attach the Pulley to the other side of the Press Frame (14) with a 3/8” x 3 1/2” Bolt (65), a 3/8” Washer (75), and a 3/8” Nylon Locknut (74).

27.Wrap the Press Cable (80) around a 3 1/2” Pulley (37). Attach the Pulley and a Cable Trap (44) to the Press Upright (6) with a 3/8” x 3 3/4” Bolt (62), a 3/8” Washer (75), and a 3/8” Nylon Locknut (74). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

28.Wrap the Press Cable (80) around a 3 1/2” Pulley (37). Attach the Pulley and a Cable Trap (44) to the bottom of the Press Upright (6) with a 3/8” x 3 3/4” Bolt (62), a 3/8” Washer (75), and a 3/8” Nylon Locknut (74). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

25
		62
		38
		80
		6
		75
		74
26
65			14
75
80
37	74
27
		74	37
			44
			80
		75
	6	62
28
		6
74
37
80	44		62
		75

13