33.Wrap the Press Cable (80) around a 3 1/2” Pulley (37). Attach the Pulley to the bracket on the Press Top Frame (13) with a 3/8” x 2” Bolt (79) and a 3/8” Nylon Locknut (74).
34.Wrap the Press Cable (80) around a 3 1/2” Pulley (37). Attach the Pulley to the bracket on the Top Frame (5) with a 3/8” x 2” Bolt (79) and a 3/8” Nylon Locknut (74).
35.Remove the 3/8” x 2 1/2” Bolt (78) from the top of the indicated Weight Carriage (28). Attach the end of the Press Cable (80) to the Weight Carriage with the Bolt (78) and 3/8” Nylon Locknut (74).
36.Identify the Butterfly Cable (81); it is approximate- ly 52” long and it has a loop on both ends.
Secure a 3/8” x 1” Bolt (97) to the bracket on the Left Butterfly Arm (17) with a 3/8” Nylon Jamnut (88). Attach one end of the Butterfly Cable (81) to the Bolt with another 3/8” Nylon Jamnut. Do not tighten the second Nylon Jamnut; the Cable must be able to pivot freely.
33 |
| 13 |
|
|
|
| |
|
|
| 74 |
|
|
| 37 |
|
|
| Bracket |
|
| 79 | 80 |
34 |
| 74 |
|
|
|
| |
| Bracket | 5 |
|
|
|
| |
| 79 | 37 |
|
| 80 |
| |
|
|
| |
35 |
| 80 |
|
|
|
| |
| 78 |
|
|
|
| 74 |
|
| 28 |
|
|
36 |
|
|
|
|
|
| 97 |
|
|
| Bracket |
|
|
| 81 |
|
|
| 88 |
|
|
| 17 |
15