26.Press a 38mm Square Inner Cap (32) into the Seat Frame (36).
Insert the M6 x 50mm Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two M6 x 16mm Screws (18).
Insert the M6 x 50mm Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten an M6 Nylon Locknut (2) with an M6 Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat Frame (36) with an M6 Washer (10) and the M6 x 50mm Screw (24).
27.Press a 38mmSquare Inner Cap (32) into the Leg Lever (29).
Lubricate the M8 x 70mm Bolt (73). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and an M8 Nylon Locknut (3). Do not over- tighten the Nylon Locknut; the Leg Lever must be able to pivot freely.
Insert two M10 Eyebolts (35) into the Leg Lever (29) from the directions shown. Tighten an M10 Nylon Locknut (21) and an M10 Washer (9) onto each Eyebolt.
28.Rest the Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Seat Frame to the Front Upright with an M8 x 67mm Carriage Bolt (14) and the Seat Knob (40).
14
26 |
|
|
|
| 13 |
| 38 |
|
| 37 | 32 |
|
| |
|
| 18 |
36 |
|
|
24 | 10 | Hole |
| 2 | |
|
| |
27 |
|
|
|
| 36 |
2 |
| 3 |
|
| |
Lubricate |
| |
| 73 | 29 |
|
| |
| 35 | 9 |
| 21 | 21 |
| 9 |
|
| 32 |
|
|
| 35 |
28 |
|
|
| 40 |
|
| 36 |
|
14 |
|
|
Pin |
|
|
42 |
|
|