Weider WESY19511 user manual

Page 27

28mm x 63mm Plastic Bushing (74)

25mm x 22mm Plastic Bushing (75)

25mm Retainer (69)

M10 x 50mm Bolt (12)

M10 x 45mm Bolt (80)

M6 x 50mm Carriage Bolt (38)

M6 x 16mm Screw (18)

M10 x 60mm Bolt (7)

M10 x 80mm Bolt (16)

M10 x 90mm Bolt (77)

Cable Clip (53)

M8 x 150mm Bolt (60)	195mm Bolt (59)
	M10 x

M10 x 95mm Bolt (71)

Image 27

Contents Model No. WESY19511 Serial No QUESTIONS?Table of Contents Decal Important PrecautionsRight Side Using the Weider 8525 weight system. If you haveBefore YOU Begin For your benefit, read this manual carefully beforeAssembly Frame AssemblyMake Things Easier for Yourself Weights Do not tighten the Nylon Locknuts yetTighten the Nylon Locknuts used in steps Weight Guides are at the top, as shown Arm AssemblyArm. Arm identification is very important for Step Ful not to confuse the Right Arm with the LeftArm 47 refer to to identify the Right Cable Trap is positioned to hold the Cable in place Cable AssemblyThat the Cable Trap is inside the U-Bracket Locate the Short Cable 58. Lay the Short Inset shows viewFrom other side Inset shows view Seat Assembly Page Page Changing the Weight Setting AdjustmentsAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart Tightening the Cables Troubleshooting and MaintenanceCable Diagram Long Cable 23 TOP ViewShort Cable Page Key No. Qty Description Part LIST-Model No. WESY19511Exploded DRAWING-Model No. WESY19511 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Remove this Part Identification Chart from the Manual Part Identification CHART-Model No. WESY19511 R0802B Page 50mm Square Outer Cap