Weider WESY29510 user manual Cable Diagram, Long Cable 41 TOP View, Short Cable

Page 21

CABLE DIAGRAM

The cable diagram below shows the proper routing of the Short Cable (42) and the Long Cable (41). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the weight system will not function properly and damage may occur. The numbers show the correct route for each cable. The starting and ending points of each cable are labeled. Be sure that the cable traps do not touch or bind the cables.

2

1—High Pulley

7

3

5

4

Long Cable (41) TOP VIEW

6

5—Long “U”-Bracket

Short Cable (42)

Weight Stack—8

4

3

1—Low Pulley

2

21

Image 21

Contents QUESTIONS? Model No. WESY29510 Serial NoCustomer HOT Line Table of Contents Decal Important PrecautionsBefore YOU Begin Right SideLeft Side Make Assembly Easier for Yourself AssemblyTighten the 5/16 Nylon Locknuts 83 used in steps 1 Frame AssemblyTighten the 5/16 Nylon Locknuts 83 used in steps 4 Nylon Locknut the Press Frame must be able to pivot freely Arm AssemblyPage Important While assembling the cables, do Cable AssemblyLocate the Long Cable 41. Route the Long That the Cable is between the PulleyPage Page Page Seat Assembly Page Page Adjustments Changing the Weight SettingAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley Station Adjusting the Height of the BAG ArmsWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Long Cable 41 TOP ViewShort Cable Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Remove this Part Identification Chart from the Manual Page Part Identification CHART-Model No. WESY29510 Remove this Part LIST/EXPLODED Drawing from the Manual Description Qty Part LIST-Model No. WESY29510Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Model No. WESY29510