Weider WESY29510 user manual

Page 15

32.Press four 3/4” Round Inner Caps (54) into the ends of the two Pad Tubes (17).

Insert one Pad Tube (17) into the Seat Frame (15). Slide a 5 1/2” Pad (18) onto each end of the Pad Tube.

Insert the other Pad Tube (17) into the Leg Lever (16). Slide a 5 1/2” Pad (18) onto each end of the Pad Tube.

33.Attach the top of the Punching Bag (30) to the 3/8” x 2” Eyebolt (64) in the Punching Bag Arm

(6) with a Cable Clip (38). Attach the bottom of the Punching Bag to the hole in the Stabilizer (1) with the Bungee Cord (29).

32
15
18
16
54
	17
	54
	18
33
64	6
64
38
30
29
Hole
1

15

Image 15

Contents QUESTIONS? Model No. WESY29510 Serial NoCustomer HOT Line Table of Contents Decal Important PrecautionsBefore YOU Begin Right SideLeft Side Make Assembly Easier for Yourself AssemblyTighten the 5/16 Nylon Locknuts 83 used in steps 1 Frame AssemblyTighten the 5/16 Nylon Locknuts 83 used in steps 4 Nylon Locknut the Press Frame must be able to pivot freely Arm AssemblyPage That the Cable is between the Pulley Cable AssemblyImportant While assembling the cables, do Locate the Long Cable 41. Route the LongPage Page Page Seat Assembly Page Page Adjustments Changing the Weight SettingAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley Station Adjusting the Height of the BAG ArmsWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Long Cable 41 TOP ViewShort Cable Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Remove this Part Identification Chart from the Manual Page Part Identification CHART-Model No. WESY29510 Remove this Part LIST/EXPLODED Drawing from the Manual Description Qty Part LIST-Model No. WESY29510Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Model No. WESY29510