Weider WEBE37340 user manual

18. Route the Medium Cable (69) over a Pulley (87)	18
and down through the Weight Guide Top Frame
(49). Attach the Pulley inside the Top Frame with	34
an M10 x 75mm Bolt (92), two M10 Washers		35	87	49
(35), two 17mm Spacers (89), and an M10 Nylon		89
Locknut (34).
				89
	69			35
				92
19. Wrap the Medium Cable (69) under a Pulley (87).	19
Attach the Pulley and a Cable Trap (88) to the
indicated hole in the Pulley Plates (82) with an
M10 x 45mm Bolt (33) and an M10 Nylon Locknut
(34). Make sure the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.	34	69
			87
		88
		82	33
20. Route the Medium Cable (69) up through the	20
Weight Guide Top Frame (49), over a Pulley (87),
and back down through the Top Frame. Attach			87
the Pulley inside the Top Frame with an M10 x
	34	69	49
75mm Bolt (92), two M10 Washers (35), two
17mm Spacers (89), and an M10 Nylon Locknut	35
	89
(34).			89
				92
			35
21. Attach the Medium Cable (69) to the M10 x	21
19mm Bolt (102) in the Weight Carriage (62) with		69
an M10 Nylon Locknut (34).
		34		102
		62

13