Weider WEBE37340 user manual

Page 8

4.Loosen the two Adjustment Knobs (22) on the Left Safety Spotter (51) by turning them counter- clockwise. Pull both Knobs out at the same time and slide the Left Safety Spotter (51) onto the Left Uprights (43, 44) and engage and tighten the Adjustment Knobs (22) into a set of holes in the Uprights.

Repeat this step with the Right Safety Spotter (50) and Right Uprights (not shown).

5.Loosen the Adjustment Knob (22) on the Right Weight Rest (52) by turning it counterclockwise. Pull the Knob out and slide the Right Weight Rest (52) onto the Right Front Upright (30). Engage and tighten the Adjustment Knob (22) into a hole in the Upright.

Repeat this step with the Left Weight Rest (not shown) and the Left Front Upright (not shown).

6.Attach the Right Top Frame (47) to the right Rear Upright (43) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Do not tighten the

Locknuts yet.

Repeat this step with the Left Top Frame (not shown) and the left Rear Upright (not shown).

4
	51
	22
	22
	43
50	44
5
52
	22
	30
6
	34
	47
	32
	43

8

Image 8

Contents Customer HOT Line QUESTIONS?Model No. WEBE37340 Serial No Table of Contents Misuse of this product may result in serious injury DecalImportant Precautions Left Side Before YOU BeginRight Side Locknuts yet Repeat this step with the Right Base not Shown AssemblyMake Things Easier for Yourself Holes Page Tighten the Locknuts yet Locknuts yet Tighten the M10 Nylon Locknuts 34 used Steps Caps 80. Do not overtighten the Locknut Locate the Medium Cable 69. Route the CablePage Locate the Butterfly Cable 31. Lubricate an Staying Motivated Muscle ChartCooling Down Exercise Guidelines Is shown pulled away from the Center Upright for clarity Do not tighten the Locknuts yet Bracket Frames must be able to pivot easily Tighten the M10 Nylon Locknuts 34 used in stepsAssemble two Pad Tubes 27 to the Leg Lever Same manner Page Adding Weight to the Weight Carriage or Barbell AdjustmentsAdjusting the Backrest Attaching the LEG Lever or Curl PAD Adding Weight to the LEG LeverAttaching the Accessories Using the Weight Rests and Safety Spotters Setting UP for Squat ExercisesTightening the Cables Knobs 22 are fully tightenedCable Diagrams Or bind the cables Medium CableButterfly Cable Long CableExercise Weight Sets Reps DateAerobic Exercise Thursday Aerobic Exercise DateMonday Part Identification CHART-Model No. WEBE37340 R0704A M10 x 68mm Bolt Part LIST-Model No. WEBE37340 Qty DescriptionExploded DRAWING-Model No. WEBE37340 R0704A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty