19.Wrap the Leg Press Cable (76) around a 4Ó Pulley (35). Attach the Pulley and a Cable Trap (44) to the welded bracket on the Stabilizer (5) with a 3/8Ó x 2Ó Bolt (62) and a 3/8Ó Nylon Locknut (50).
20.Remove the
Attach the end of the Leg Press Cable (76) to the Pulley Bracket (91) with a 1/4Ó Flat Washer (71) and a 1/4Ó Nylon Locknut (25).
Lay the Pulley Bracket (91) and the Leg Press Cable (76) aside; they will be attached in step 28.
21.Identify the High Cable (73), which has a ball on one end and a bolt on the other end.
Feed the end of the High Cable (73) with the bolt up through the indicated slot in the Main Upright (3). Feed almost all of the Cable through the slot.
Slide a 3/8Ó Flat Washer (55) and a 5/8Ó x 1/2Ó Pulley Bushing (42) onto a 3/8Ó x 2 1/2Ó Bolt (54).
Wrap the High Cable (73) around a 4Ó Pulley (35). Hold the Pulley inside the indicated slot in the Main Upright (3). Insert the 3/8Ó x 2 1/2Ó Bolt (54) through the Main Upright and the Pulley.
Slide another 5/8Ó x 1/2Ó Pulley Bushing (42) and 3/8Ó Flat Washer (55) onto the 3/8Ó x 2 1/2Ó Bolt (54). Tighten a 3/8Ó Nylon Jam Nut (63) onto the Bolt.
Remove the
19 |
|
|
62 | 35 | 44 |
|
| |
|
| Bracket |
| 76 | 50 |
| 5 |
|
20 |
|
|
25 | 91 |
|
71 |
|
|
| 76 |
|
21 |
|
|
Bolt | 73 | Slot |
| ||
| 54 | |
| 35 | |
| 55 | |
|
| |
|
| 42 |
3 |
|
|
|
| 59 |
55 |
| Ball |
63 |
|
|
50 |
|
|
42 |
| 35 |
|
| |
| 12 |
|
12