Weider 16.8ST manual

Page 19

41.Attach the remaining Seat (13) to the Sliding Seat Frame (74) with four 1/4Ó x 3/4Ó Bolts (17).

42.Attach the Leg Press Backrest (70) to the Sliding Seat Frame (74) with four 1/4Ó x 3/4Ó Bolts (17).

43.Press 3/4Ó Round Inner Caps (34) into the ends of the two Pad Tubes (28).

Slide one Pad Tube (28) into the hole in the front leg on the Base (8). Slide a Foam Pad (30) onto each end of the Pad Tube.

Slide the other Pad Tube (28) into the hole in the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube.

44.Slide the four Tinnerman Clips (38) down over the slots in the bracket on the Stabilizer (5).

Insert the Weight Pin (39) under one of the Weights (26).

41
	13
	74		17
	74
42
	17		70
	17
		74
43			34
		8	30
			30
			28
			34
	34
		30
			29
34
		30
44
	26
			38
	5		39
			39
			Bracket
		38

19

Image 19

Contents Model No. WESY69100 Serial No QUESTIONS?Limited Warranty Table of ContentsImportant Precautions Decal Before You BeginMake Assembly Easier for Yourself AssemblyNylon Locknuts yet Frame AssemblyPage Page Open the parts bags labeled Òarm Assemblyó Arm AssemblyRear Leg Press Upright 97 has an extra hole in it Cable Assembly Page Page Page Page Page Lifted to complete this step Open the parts bag labeled Òarm and Seat ASSEMBLY.Ó Seat AssemblyPage Align Corners Bracket 103 Leg Press Cable Low Cable Cable ID Chart Cable DiagramHigh Cable Attaching the Lat Bar, Ankle Strap, or Ab Strap AdjustmentAttaching the Curl Pad Adjusting the Position of the Press Arm HandlesAdjusting the Position of the Backrest Using the Leg Lever LockTightening the Cables Trouble-shooting and MaintenancePress Weight Resistance ChartArm Lower Upper Leg Press PulleyToning Weight LossExercise Guidelines Muscle BuildingCooling Down Part Identification ChartÑWESY69100 Page Round Inner Cap 2Ó x 1 3/4Ó Bushing Qty Description Part ListÑModel No. WESY69100Exploded DrawingÑModel No. WESY69100 Ordering Replacement Parts