Weider 16.8ST manual Lifted to complete this step

36. Wrap the Low Cable (72) around a 4Ó Pulley (35).	36
Attach the Pulley to the front hole in the welded	72
bracket on the Main Upright (3) with a 3/8Ó x 2Ó Bolt
(62) and a 3/8Ó Nylon Locknut (50).
			35
			62
			3
			50
37. Note: The top weight (not shown) may need to be	37
lifted to complete this step.
Feed the end of the Low Cable (72) through the indi-
cated slot in the Main Upright (3).			54
Wrap the Low Cable (72) around a 4Ó Pulley (35).	35		55
Attach the Pulley inside the slot in the Main Upright
			42
(3) with a 3/8Ó x 2 1/2Ó Bolt (54), two 3/8Ó Flat
Washers (55), two 5/8Ó x 1/2Ó Pulley Bushings (42),			72
and a 3/8Ó Nylon Jam Nut (63).
	63		42
		55
			Slot
			3

17