Weider 16.8ST manual Rear Leg Press Upright 97 has an extra hole in it

12.Attach the Rear and Forward Leg Press Uprights (97, 98) to the Leg Press Base (84) with two 3/8Ó x 3 1/4Ó Bolts (87) and two 3/8Ó Nylon Locknuts (50). Note:

The Rear Leg Press Upright (97) has an extra hole in it.

Press two 2Ó Square Inner Caps (33) into the Rear and Forward Leg Press Uprights (97, 98).

13.Attach the Leg Press Attachments (100) to the Rear and Forward Leg Press Uprights (97, 98) with two 3/8Ó x 3Ó Bolts (45) and two 3/8Ó Nylon Jam Nuts (63).

14.Attach the Leg Press Plate (85) to the Leg Press Attachments (100) with two 3/8Ó x 3 1/4Ó Bolts (87), eight 3/8Ó Flat Washers (55), and two 3/8Ó Nylon Jam Nuts (63).

Note: All of the eight 3/8Ó Flat Washers (55) must be between the Leg Press Attachments (100) and the welded tube on the Leg Press Plate (85).

12	33
	97
	98
		87
	84
	50
13		45
	97
		100
		98
63	100
14	100
		85
		87
		55
	55	Welded
	63	Tube
10