26.Press a 1 1/2Ó Square Inner Cap (32) into the Leg Lever (29).
Attach the 5/16Ó x 2Ó Eyebolt (62) to the Leg Lever
(29)with a 5/16Ó Flat Washer (8) and a 5/16Ó Nylon Locknut (3).
Lubricate a 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and a 5/16Ó Nylon Locknut (3). Do not overtighten the
Nylon Locknut; the Leg Lever must be able to pivot freely.
27.Set the bracket on the Seat Frame (36) onto the indicated pin on the Front Upright (42). Attach the Seat Frame with a 5/16Ó x 2 3/4Ó Carriage Bolt (14) and the Seat Knob (40).
28.Press 3/4Ó Round Inner Caps (34) into the ends of a Pad Tube (28). Insert the Pad Tube into the Seat Frame (36). Slide a Pad (30) onto each end of the Pad Tube.
Press 3/4Ó Round Inner Caps (34) into the ends of the other Pad Tube (28). Insert the Pad Tube into the Leg Lever (29). Slide a Pad (30) onto each end of the Pad Tube.
14
26 |
|
|
|
|
|
|
|
| 3 |
|
| 36 |
|
|
|
|
| 33 | 29 |
|
|
|
| |
|
|
|
| 8 |
|
| 62 |
|
|
|
|
|
| 3 |
|
|
|
| 32 |
27 | 36 | 40 |
|
|
| 14 |
|
|
|
| Pin |
|
|
|
| 42 |
|
|
|
28 |
|
|
|
|
|
| 36 |
| 34 |
|
|
|
| 30 |
|
|
|
| 28 |
|
| 30 |
|
|
| 34 |
|
| 29 |