8.Attach the upper ends of the Weight Guides (72) to the Top Frame (67) with the 5/16Ó x 6Ó Bolt (74), two 1/2Ó x 3/4Ó Spacers (73), and a 5/16Ó Nylon Locknut
(3).
Tighten all Nylon Locknuts used in steps 4 through 8.
9.Press two 1 3/4Ó Square Inner Caps (44), two 1 1/2Ó Square Inner Caps (32), and two 1Ó Round Inner Caps (49) into the Arm Frame (52).
10.Lubricate the upper axle on the Arm Frame (52). Hold the axle between the two Arm Frame Bushings (68). Set the Arm Frame Bushings and the Arm Frame on the welded plate on the Top Frame (67). Place the Arm Frame Bracket (69) over the Arm Frame Bushings. Attach the Arm Frame Bracket to the Top Frame with four 1/4Ó x 1/2Ó Screws (31) and 1/4Ó Nylon Jam Nuts (86). The indicated bracket on the Arm Frame must face forward.
7
8 |
|
|
73 |
|
|
85 | 3 |
|
67 |
| |
|
| |
74 |
|
|
72 |
|
|
9 |
|
|
| 32 |
|
|
| 52 |
49 |
|
|
|
| 44 |
10 |
|
|
31 |
|
|
69 | 68 | Lubricate |
|
| |
|
| 52 |
| 67 |
|
| 86 | Bracket |