Weider WESY85070 user manual TROUBLE-SHOOTING and Maintenance, Tightening the Cables

Page 19

TROUBLE-SHOOTING AND MAINTENANCE

Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.

TIGHTENING THE CABLES

Woven cable, the type of cable used on the home gym system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, the cables should be tightened. Locate the adjustment sleeve and adjustment screw near the lower end of the Short Cable (23). Loosen the adjustment screw. Pull the end of the Short Cable until there is no slack. Slide the adjustment sleeve and the ball against the indicat- ed 3 1/2Ó Pulley (15). Retighten the adjustment screw. Make sure that the cables are not too tight, or the top weight will be lifted off the weight stack.

15

Adjustment

Ball

Screw

Adjustment

Sleeve

23

19

Image 19
Contents Model No. WESY85070 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsBefore YOU Begin DimensionsFollowing Tools not Included are Required for Assembly AssemblyPage Page Tighten all Nylon Locknuts used in steps 4 through Page Page Cable is between the Pulley and the top of the bracket Page Page Cable is between the Pulley and the Metal Spacer Nylon Locknut the Leg Lever must be able to pivot freely Page Changing the Weight Setting AdjustmentSwitching the Arms to the Press Mode or the Butterfly Mode Attaching the LEG Lever to the LOW Pulley Station Attaching and Removing the SeatNylon Strap 39 can be attached in the same manner Tightening the Cables TROUBLE-SHOOTING and MaintenanceKey No. Qty Description Part LISTÑModel No. WESY85070Exploded DRAWINGÑModel No. WESY85070 Cable Diagrams Page Page Page Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT