5.Press the Weight Tube Bumper (79) into the end of the Weight Tube (80). Slide the Top Weight (77) onto the Weight Tube. Be sure that the pins on the Weight Tube are resting in the pin grooves under the Top Weight.
Locate the Short Cable (23). Attach the Short Cable to the Weight Tube (80) with a 5/16Ó x 1 1/2Ó Bolt (24) and a 5/16Ó Nylon Locknut (3).
6.Lubricate the insides of the holes in the Top Weight (77). Slide the Top Weight onto the stack of Weights (25).
7.Press two 2Ó Square Inner Caps (27) into the Top Frame (67).
Attach the Top Frame (67) to the Front Upright (42) with two 5/16Ó x 2 3/4Ó Bolts (11), the Support Plate (6), and two 5/16Ó Nylon Locknuts (3). Do not tight- en the Nylon Locknuts yet.
Attach the Top Frame (67) to the Stop Bracket (63) with a 5/16Ó x 2 3/4Ó Bolt (11), 5/16Ó Flat Washer (8), and 5/16Ó Nylon Locknut (3). Do not tighten the Nylon Locknut yet.
6
5 |
|
|
|
| 23 |
|
|
|
|
| 77 |
|
|
| 3 |
| 24 |
|
|
| Pins |
| 80 |
|
|
| 79 |
6 |
|
|
|
| 77 |
|
|
|
|
| Lubricate |
| 25 |
|
|
7 | 11 |
|
|
|
| 11 | |
|
|
| |
|
| 6 |
|
27 |
| 8 | 67 |
|
| ||
|
|
| |
|
|
| 27 |
|
|
| 3 |
| 3 |
| 63 |
|
|
| |
|
| 42 |
|