Weider WESY85070 user manual Nylon Strap 39 can be attached in the same manner

Page 18

ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATION

Attach the Lat Bar (85) to the Short Cable (23) with a Cable Clip (83). For some exercises, the Chain (84) should be attached between the Lat Bar and the Short Cable with two Cable Clips. Adjust the length of the

Chain between the Lat Bar and the Short Cable so the Lat Bar is in the correct starting position for the exercise to be performed.

The Nylon Strap (39) can be attached in the same manner.

23
83	84
	84
	83
	85
39

Image 18

Contents QUESTIONS? Model No. WESY85070 Serial NoCustomer HOT Line Table of Contents Important PrecautionsDimensions Before YOU BeginAssembly Following Tools not Included are Required for AssemblyPage Page Tighten all Nylon Locknuts used in steps 4 through Page Page Cable is between the Pulley and the top of the bracket Page Page Cable is between the Pulley and the Metal Spacer Nylon Locknut the Leg Lever must be able to pivot freely Page Adjustment Changing the Weight SettingSwitching the Arms to the Press Mode or the Butterfly Mode Attaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationNylon Strap 39 can be attached in the same manner TROUBLE-SHOOTING and Maintenance Tightening the CablesPart LISTÑModel No. WESY85070 Key No. Qty DescriptionExploded DRAWINGÑModel No. WESY85070 Cable Diagrams Page Page Page Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT