Weider WESY85070 user manual Cable Diagrams

Page 22

CABLE DIAGRAMS

The cable diagrams below show the proper routing of the Short Cable (23) and the Long Cable (66). Use the diagram to make sure that the two cables are assembled correctly. The numbers show the routing of each cable.

Long Cable (66)

2	4	Top Frame
		8	High Pulley
			High Pulley
			1
			5
3		6
		7

Short Cable (23)

Weight StackÑ1

Low PulleyÑ3

Image 22

Contents Model No. WESY85070 Serial No QUESTIONS?Customer HOT Line Table of Contents Important PrecautionsDimensions Before YOU BeginAssembly Following Tools not Included are Required for AssemblyPage Page Tighten all Nylon Locknuts used in steps 4 through Page Page Cable is between the Pulley and the top of the bracket Page Page Cable is between the Pulley and the Metal Spacer Nylon Locknut the Leg Lever must be able to pivot freely Page Changing the Weight Setting AdjustmentSwitching the Arms to the Press Mode or the Butterfly Mode Attaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationNylon Strap 39 can be attached in the same manner TROUBLE-SHOOTING and Maintenance Tightening the CablesPart LISTÑModel No. WESY85070 Key No. Qty DescriptionExploded DRAWINGÑModel No. WESY85070 Cable Diagrams Page Page Page Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT