28.Wrap the Long Cable (2) around a 3 1/2Ó Pulley (35) in the direction shown. Attach the Pulley to the Front Upright (42) with a 3/8Ó x 3 1/2Ó Bolt (54), a Cable Trap (66), a 3/8Ó Flat Washer (55) and a 3/8Ó Nylon Jamnut (57).
Attach the closed loop on the end of the Long Cable
(2) onto the Eyebolt (44) with a Cable Clip (73). Note: Cable Clips are located in the parts bag labeled
ÒSEAT ASSEMBLY.Ó
Seat Assembly
29.Locate and open the parts bag labeled ÒSEAT ASSEMBLY.Ó
Attach the Backrest (41) to the Front Upright (42) with two 1/4Ó x 2 1/2Ó Screws.
30.Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4Ó x 1/2Ó Screws (17).
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the indicat- ed hole in the Seat Frame (36). Tighten a 1/4Ó Nylon Locknut (82) with a 1/4Ó Flat Washer (81) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4Ó Flat Washer (81) and a 1/4Ó x 2Ó Bolt (71).
28 | 42 |
|
|
|
|
| |
| 57 |
|
|
35 | 55 |
|
|
|
|
| |
|
|
| 2 |
| 66 |
|
|
54 |
|
| 73 |
|
|
| 44 |
|
| 12 |
|
29 |
|
|
|
|
|
| 42 |
| 43 |
|
|
|
|
| 41 |
| 43 |
|
|
30 |
|
| 13 |
|
|
| |
|
|
| 38 |
|
| 36 | 37 |
|
|
| |
|
|
| 17 |
| 81 |
| 81 |
| 71 |
| |
|
| 82 | |
|
|
|
14