SEAT ASSEMBLY
37.Locate and open the parts bag labeled “SEAT ASSEMBLY.”
Insert a 1/4” x 2 1/2” Carriage Bolt (92) through the center hole in a Seat Plate (37). Attach the Seat Plate to the Leg Press Backrest (85) with two 1/4” x 3/4” Screws (18).
Insert the 1/4” x 2 1/2” Carriage Bolt (92) through the indicated hole in the Leg Press Upright (56). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Washer
(10)onto the Carriage Bolt. Attach the top of the Leg Press Backrest (85) to the Leg Press Upright with a 1/4” x 2 1/2” Screw (43) and a 1/4” Washer
38.Attach one end of a Seat (13) to the Leg Press Seat Frame (79) with two 1/4” x 3/4” Screws (18). Attach the other end of the Seat to the Leg Press Seat Frame with a 1/4” Washer (10) and a 1/4” x 2 1/2” Screw (43).
39.Attach the Front Backrest (41) to the Front Upright
(42)with two 1/4” x 2 1/2” Screws (43) and two 1/4” Washers (10). Note: Make sure the Backrest is oriented as shown.
40.Press a 1 1/2” Square Inner Cap (32) into the Front Seat Frame (36).
Insert a 1/4” x 2” Carriage Bolt (38) through the cen- ter hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws (18).
Insert the 1/4” x 2” Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4” Washer (10) and a 1/4” x 2” Machine Screw (81).
18
37 | 85 |
| |
|
| ||
56 |
|
|
|
| 37 | 92 |
|
| 18 |
|
|
10 |
|
|
|
43 |
|
|
|
2 |
|
|
|
38 |
| 13 |
|
|
|
| |
|
| 18 |
|
|
| 79 |
|
| 10 |
| |
| 43 |
| |
39 | 42 |
|
|
|
|
| |
|
| 41 |
|
43 10 |
|
|
|
|
| Thick |
|
|
| End |
|
40 |
|
|
|
|
| 13 |
|
|
| 38 |
|
| 37 |
|
|
|
| 18 | 32 |
|
|
| |
|
| 36 |
|
81 | 10 | 2 |
|
|
|
| |