Weider WESY39310 user manual

Page 20

44. Remove the adhesive backing from the PRO 9400 decal and apply it to the Front Upright (42).

44

PRO 9400

Decal

42

42

45.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on page 21 of this manual.

Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on page 25 and 26 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE- NANCE on page 24.

20

Image 20

Contents Customer HOT Line QUESTIONS?Model No. WESY39310 Serial No Table of Contents Important Precautions Before YOU Begin Decal NoAssembly Chart located in the center of this manualFollowing Tools not Included are Required for Assembly Questions?Locknuts yet Do not tighten the Nylon Locknuts yetTighten all 5/16 Nylon Locknuts 3 used in steps Holes in the Weight Guides are at the top, as Shown On the Weight Tube is sitting in the pin grooves Top WeightWeight Guides are at the top, as shown Locate and open the parts bag labeled ARM Assembly Nylon Locknut the Leg Press Arm must be able to pivot freelyNylon Locknut yet Cable Assembly Locknut the Pulley Bracket must be able to move freely Page Locate the Low Cable 23 and the bag labeled LOW PULLEY. Route the Low Cable under2 Low Pulley 76. Attach the Pulley X 9/16 Spacer 7 to the Press Frame 17 withPage Cable Trap is positioned to hold the Cable in place Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyPage Page Adjustments Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams TOP ViewMilitary Press Cable 72 and Leg Press Cable Leg Press CableExploded DRAWING-Model No. WESY39310 Page Page Part LIST-Model No. WESY39310 Exploded Drawing Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty